2011 Subaru Outback Owner's Manual - Page 340

In case of emergency 9-15 Rear tie-down holes: WARNING Use the rear tie-down holes only for downward anchoring. If they are used to anchor the vehicle in any other direction, cables may slip out of the holes, possibly causing a dangerous situation. properly with safety chains. Each safety chain should be equally tightened and care must be taken not to pull the chains so tightly that the suspension bottoms out. & Towing with all wheels on the ground & Using a flat-bed truck WARNING This is the best way to transport your vehicle. Use the following procedures to ensure safe transportation. 1. Shift the select lever into the "P" position for AT and CVT models or the shift lever into "1st" for MT models. 2. Apply the parking brake. 3. Secure the vehicle onto the carrier . Never turn the ignition switch to the "LOCK" position while the vehicle is being towed because the steering wheel and the direction of the wheels will be locked. . Remember that the brake booster and power steering do not function when the engine is not running. Because the engine is - CONTINUED - 1) Rear tie-down hole The rear tie-down holes are located near each of the jack-up reinforcements.