Acer R5250-Q2000 Configuration Guide - Page 105

from the driver diskette. 5. When installing MSM (MegaRAID Storage Manager) for SAS RAID daughter board after installation complted OR if you have installed the ATI FireGL V5200 in the system, you are required to manually to select/install additional package at the Package Installation Defaults. 6. At the Package Installation Defaults, select Customize software packages to be installed and click Next. 7. At the Package Group Selection step, hold the shift key to select all the listed packages in the right pane under Development, and right click on all the items you just selected and then click "Select all optional packages". 8. After selecting the entire package under Development, click Next to follow the normal procedure to finish the installation. Gigabit Ethernet Driver Installation The Gigabit Ethernet driver installation is the same as SAS daughter board installed. Please refer to the Red Hat Enterprise Linux 5.0 Installation (SAS Daughter Board) Gigabit Ethernet Driver Installation section. VGA Driver Installation (onboard XGI Z9s) The XGI Z9s driver installation is the same as SAS daughter board installed. Please refer to the Red Hat Enterprise Linux 5.0 Installation (SAS Daughter Board) XGI Z9s Driver Installation section. VGA Driver Installation (ATI FireGL V5200) TBD RAID Utility Installation The MegaRAID Storage Manager for SAS RAID daughter board installation is the same as SAS daughter board installed. Please refer to the Red Hat Enterprise Linux 5.0 Installation (SAS Daughter Board) RAID Utility Installation section. Red Hat Enterprise Linux 5.0 Installation (with onboard SATA RAID) Below information describes how to manually install Red Hat Enterprise Linux 5.0 on Altos R5250 with onboard SATA RAID. Drivers Required For Red Hat Enterprise Linux 5.0 Installation, the following device drivers are required. Device Version Directory on EasyBUILD Onboard SATA 9.44 EB8\Disk\r5250\onboard\sataraid\rhel5 89 Altos R5250 Installation Configuration Guide