Acer R5250-Q2000 Configuration Guide - Page 97

8.0 build 100 (or later) first before the installation. 2. Type linux dd when the prompt boot: appears at the start. 3. Please select the sda as the Driver Disk Source. 4. Follow the instruction to load the driver for SAS RAID daughter board from the driver diskette. 5. When installing MSM (MegaRAID Storage Manager) for SAS RAID daughter board after installation complted OR if you have installed the ATI FireGL V5200 in the system, you are required to manually to select/install additional package at the Package Installation Defaults. 6. At the Package Installation Defaults, select Customize software packages to be installed and click Next. 7. At the Package Group Selection step, hold the shift key to select all the listed packages in the right pane under Development, and right click on all the items you just selected and then click "Select all optional packages". 8. After selecting the entire package under Development, click Next to follow the normal procedure to finish the installation. Gigabit Ethernet Driver Installation The Gigabit Ethernet driver installation is the same as SAS daughter board installed. Please refer to the Red Hat Enterprise Linux 5.0 EM64T Installation (SAS Daughter Board) Gigabit Ethernet Driver Installation section. VGA Driver Installation (onboard XGI Z9s) The XGI Z9s driver installation is the same as SAS daughter board installed. Please refer to the Red Hat Enterprise Linux 5.0 EM64T Installation (SAS Daughter Board) XGI Z9s Driver Installation section. VGA Driver Installation (ATI FireGL V5200) TBD RAID Utility Installation 1. You can find the MegaRAID Storage Manager for SAS RAID daughter board in EasyBUILD 8.0 build 100. Please refer to Directory on EasyBUILD in Software Required section for the utility and copy it from the EasyBUILD 8.0 build 100 to HDD first. # mount /media/cdrom # cp -R /media/cdrom/app/r5250/raid/lsi1068/Linux/. /tmp 2. Install MegaRAID Storage Manager # cd /tmp/ 81 Altos R5250 Installation Configuration Guide