Acer R5250-Q2000 Configuration Guide - Page 106
Please refer to the Appendix A. for the Onboard SATA RAID Configuration.
UPC - 750519188644
View all Acer R5250-Q2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
RAID Onboard NVIDIA NFP3600 Chipset Onboard NVIDIA nForce Networking Controller Onboard XGI Z9s ATI FireGL V5200 N/A 0.62 1.12.03 8.35.5 \ OS built-in \Disk\R5250\NIC\Nvidia\rhel5\ \Disk\R5250\onboard\xgiz9s\rhel5\ \Disk\R5250\graphic\V5200\rhel5\ Software Required The management utility for onboard SATA RAID can be found in the EasyBUILD 8.0 build 100 (or later). Software Version Directory on EasyBUILD Onboard SATA 9.44 RAID utility \app\R5250\onboard\sataraid\Linux\rhel 5\ Configuring onboard SATA RAID Please refer to the Appendix A. for the Onboard SATA RAID Configuration. Installation Tips 1. Since Red Hat Enterprise Linux 5 cannot recognize the onboard SATA RAID, you need to make a driver diskette from the EasyBUILD 8.0 build 100 (or later) first before the installation. 2. Type linux dd when the prompt boot: appears at the start. 3. Please select the sda as the Driver Disk Source. 4. Follow the instruction to load the onboard SATA RAID driver from the driver diskette. 5. At the Package Installation Defaults, select Customize software packages to be installed. 6. At the Package Group Selection step, select Graphic Internet under Applications. 7. If you have installed the ATI FireGL V5200 in the system, please also select Development Tools and under Development. If you don't have ATI FireGL V5200, please go to next step directly 8. After adding the additional packages, follow the normal procedure to finish the installation. Gigabit Ethernet Driver Installation The Gigabit Ethernet driver installation is the same as SAS daughter board installed. Please refer to the Red Hat Enterprise Linux 5.0 Installation (SAS Daughter Board) Gigabit Ethernet Driver Installation section. Altos R5250 Installation Configuration Guide 90