Acer R5250-Q2000 Configuration Guide - Page 74

the same as SAS daughter board installed. Please refer to the Windows Vista Enterprise x64 Edition Installation (SAS Daughter Board) RAID Utility Installation section. Windows Vista Enterprise x64 Edition Installation (with onboard SATA RAID) Below information describes how to manually install Windows Vista Enterprise x64 Edition on Altos R5250 with onboard SATA RAID. Drivers Required For Windows Vista x64 Installation, the following device drivers are required. Device Version Directory on EasyBUILD Onboard SATA RAID 5.10.2600.955 Disk\r5250\onboard\sataraid\x64\vista\ Onboard NVIDIA NFP3600 Chipset Package 1502 \Disk\R5250\onboard\Chipset\x64\vista\ Onboard NVIDIA nForce Networking Controller 65.7.4.0 Including in chipset driver package 1502 Onboard XGI Z9s 6.14.10.900 \Disk\r5250\onboard\xgiz9s\x64\vista\ ATI FireGL V5200 8.362.0.0 \Disk\R5250\graphic\V5200\x64\vista\ Software Required The management utility for onboard SATA RAID can be found in the EasyBUILD 8.0 build 100 (or later). Software Version Directory on EasyBUILD Onboard SATA RAID Utility 1.4.6.08 Including in chipset driver package 1502 Configuring onboard SATA RAID Please refer to the Appendix A. for the onboard SATA RAID configuration. Installation Tips 1. Though Windows Vista x64 can recognize the onboard SATA RAID, we still replace the driver with the one in EasyBUILD. Please make the driver diskette from the EasyBUILD 8.0 build 100 first before the installation. 2. Please boot the system form the Windows Vista x64 CD/DVD. Follow the instructions to do the installation. 3. When you see the "Where do you want to install Windows?" on the screen, please insert the driver diskette and click on Load Driver. 4. Click on OK. You will see the NVIDIA nForce RAID Controller (A:\nvrd64.inf), NVIDIA nForce RAID Device (A:\nvrd64.inf) and NVIDIA nForce Serial ATA Controller (A:\nvrd64.inf) listed. Altos R5250 Installation Configuration Guide 58