Acer R5250-Q2000 Configuration Guide - Page 48
Windows Server 2003 R2 Enterprise x64 Edition SP2 Installation, SAS RAID daughter board with i-
UPC - 750519188644
View all Acer R5250-Q2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
12. Checking the Device Manager, you would see ATI FireGL V5200 and ATI FireGL V5200 Secondary listed in Display adapters in Device Manager. 13. After you install the driver for ATI FireGL V5200, please also install the driver for onboard XGI Z9s. RAID Utility Installation 1. For installing MegaRAID Storage Manager for SAS daughter board, please insert the EasyBUILD 8.0 build 100 into the optical drive. 2. Expand Utilities -> Altos R5250 -> SAS Daughter Board, select MegaRAID Storage Manager (Windows Server 2003 R2 x64) and click on Setup. 3. Follow the instruction, accept the license agreement and use the default setting to the Setup Type. 4. At the Setup Type, please select StandAlone. 5. Follow the instruction again to complete the installation. Network Utility Installation The ForceWare Network Access Manager is included in the chipset driver package. The ForceWare Network Access Manager will be installed automatically when you installing the chipset driver package. Windows Server 2003 R2 Enterprise x64 Edition SP2 Installation (SAS RAID daughter board with i-Button) Below information describes how to manually install Windows Server 2003 R2 Enterprise x64 Edition on Altos R5250 SAS RAID daughter board with i-Button. Drivers Required For Windows 2003 x64 Installation, the following device drivers are required. Device Version Directory on EasyBUILD SAS RAID Daughter 09.25.1029.20 \Disk\r5250\raid\sas1068\x64\ws03\ Board 07 Onboard NVIDIA NFP3600 Chipset Package 9.18 \Disk\R5250\onboard\Chipset\x64\ws03 \ Onboard NVIDIA nForce Networking Controller 65.2.0.0 Including in chipset driver package 9.18 Onboard XGI Z9s 6.14.10.0900 \Disk\r5250\onboard\xgiz9s\x64\ws03\ ATI FireGL V5200 8.323.1.0 \Disk\R5250\graphic\V5200\x64\ws03\ Software Required The management utility for SAS daughter board and NIC can be found in the EasyBUILD 8.0 build 100 (or later). Software Version Directory on EasyBUILD Altos R5250 Installation Configuration Guide 32