Acer R5250-Q2000 Configuration Guide - Page 80

Windows XP Professional x64 Edition SP2 Installation (SAS Daughter Board) Below information describes how to manually install Windows XP Professional x64 Edition on Altos R5250 SAS daughter board installed. Drivers Required For Windows XP x64 Installation, the following device drivers are required. Device Version Directory on EasyBUILD SAS Daughter Board 1.25.10.00 \Disk\r5250\sas\sas1068\x64\vista Onboard NVIDIA NFP3600 Chipset Package 9.21 \Disk\R5250\onboard\Chipset\x64\wsxp \ Onboard NVIDIA nForce Networking Controller 65.3.1.0 Including in chipset driver package 9.21 Onboard XGI Z9s 6.14.10.900 \Disk\r5250\onboard\xgiz9s\x64\wsxp\ ATI FireGL V5200 8.323.1.0 \Disk\R5250\graphic\V5200\x64\wsxp\ Software Required The management utility for SAS daughter board and NIC can be found in the EasyBUILD 8.0 build 100 (or later). Software Version Directory on EasyBUILD MegaRAID Storage 2.30 Manager \app\R5250\sas\lsi1068\Windows\ ForceWare Network 65.31 Access Manager Including in chipset driver package 9.21 Configuring SAS Daughter Board Please refer to the Appendix B. for the SAS Daughter Board Configuration. Installation Tips 1. As Windows XP x64 can't recognize the SAS daughter board, you need to make a driver diskette from the EasyBUILD 8.0 build 100 first before the installation. 2. Press F6 at the beginning of installation for providing the driver diskette for the SAS DAUGHTER BOARD. 3. Select "LSI Fusion-MPT SAS Driver (XP-64)" as target driver 4. After loading the RAID driver from diskette, follow the normal procedure to finish the installation. Chipset Driver Package Installation 1. After the installation completes, you would see the following devices with yellow mark in Device Manager. Altos R5250 Installation Configuration Guide 64