Acer R5250-Q2000 Configuration Guide - Page 73

Controller Onboard XGI Z9s ATI FireGL V5200 6.14.10.900 8.362.0.0 \Disk\r5250\onboard\xgiz9s\x64\vista\ \Disk\R5250\graphic\V5200\x64\vista\ Software Required The management utility for SAS RAID daughter board can be found in the EasyBUILD 8.0 build 100 (or later). Software Version Directory on EasyBUILD MegaRAID Storage 2.30 Manager \app\r5250\raid\lsi1068\Windows\ Configuring SAS RAID Daughter Board Please refer to the Appendix C. for the SAS Daughter Board Configuration. Installation Tips 1. Though Windows Vista x64 can recognize the SAS RAID daughter board controller, we still replace the driver with the one in EasyBUILD. Please make the driver diskette from the EasyBUILD 8.0 build 100 first before the installation. 2. Please boot the system form the Windows Vista x64 CD/DVD. Follow the instructions to do the installation. 3. When you see the "Where do you want to install Windows?" on the screen, please insert the driver diskette and click on Load Driver. 4. Click on OK. You will see the supported devices listed. 5. Select "LSI Logic MegaRAID SAS 8208ELP and 8204ELP (A:\MegaSR.INF)" and click on Next. 6. After the driver is loaded and returned to "Where do you want to install Windows?" page, click on Next to continue the installation. 7. Follow the instructions to finish the installation. Chipset Driver Installation The chipset driver installation is the same as SAS daughter board installed. Please refer to the Windows Vista Enterprise x64 Edition Installation (SAS Daughter Board) Chipset Driver Installation section. Gigabit Ethernet Driver Installation The Gigabit Ethernet driver is included in the chipset driver package. The Gigabit Ethernet driver would be installed automatically when you installing the chipset driver package. RAID Utility Installation The MegaRAID Storage Manager installation for SAS RAID daughter board is 57 Altos R5250 Installation Configuration Guide