Acer R5250-Q2000 Configuration Guide - Page 87

Windows XP Professional Edition SP2 Installation (SAS Daughter Board) Below information describes how to manually install Windows XP Professional Edition on Altos R5250 with SAS daughter board. Drivers Required For Windows XP Installation, the following device drivers are required. Device Version Directory on EasyBUILD SAS Daughter Board 1.25.10.00 \Disk\r5250\sas\sas1068\wsxp\ Onboard NVIDIA NFP3600 Chipset Package 9.21 \Disk\R5250\onboard\Chipset\wsxp\ Onboard NVIDIA nForce Networking Controller 65.3.1.0 Including in chipset driver package 9.21 Onboard XGI Z9s 6.14.10.900 \Disk\R5250\onboard\xgiz9s\wsxp\ ATI FireGL V5200 8.323.1.0 \Disk\R5250\graphic\V5200\wsxp\ Software Required The management utility for SAS daughter board can be found in the EasyBUILD 8.0 build 100 (or later). Software Version Directory on EasyBUILD MegaRAID Storage 2.30 Manager \app\R5250\sas\lsi1068\Windows\ ForceWare Network 65.31 Access Manager Including in chipset driver package 9.21 Configuring SAS Daughter Board Please refer to the Appendix B. for the SAS daughter board configuration. Installation Tips 1. As Windows XP can't recognize the SAS daughter board, you need to make a driver diskette from the EasyBUILD 8.0 build 100 first before the installation. 2. Press F6 at the start of installation to provide the driver disk for the SAS daughter board. 3. Select "LSI PCI Fusion-MPT Driver (XP 32-bit)" as target driver 4. After loading the RAID driver from diskette, follow the normal procedure to finish the installation. Chipset Driver Installation 1. After the installation completes, you would see the following devices with yellow mark in Device Manager. 71 Altos R5250 Installation Configuration Guide