Acer R5250-Q2000 Configuration Guide - Page 78

4. Click on OK. You will see the supported devices listed. 5. Select "LSI Logic MegaRAID SAS 8208ELP and 8204ELP (A:\MegaSR.INF)" and click on Next. 6. After the driver is loaded and returned to "Where do you want to install Windows?" page, click on Next to continue the installation. 7. Follow the instructions to finish the installation. Chipset Driver Installation The chipset driver installation is the same as SAS daughter board installed. Please refer to the Windows Vista Enterprise Edition Installation (SAS Daughter Board) Chipset Driver Installation section. Gigabit Ethernet Driver Installation The Gigabit Ethernet driver is included in the chipset driver package. The Gigabit Ethernet driver would be installed automatically when you installing the chipset driver package. RAID Utility Installation The MegaRAID Storage Manager installation for SAS RAID daughter board is the same as SAS daughter board installed. Please refer to the Windows Vista Enterprise Edition Installation (SAS Daughter Board) RAID Utility Installation section. Windows Vista Enterprise Edition Installation (with onboard SATA RAID) Below information describes how to manually install Windows Vista Enterprise Edition on Altos R5250 with onboard SATA RAID. Drivers Required For Windows Vista Installation, the following device drivers are required. Device Version Directory on EasyBUILD Onboard SATA RAID 5.10.2600.955 \Disk\r5250\onboard\sataraid\vista\ Onboard NVIDIA NFP3600 Chipset Package 1502 \Disk\R5250\onboard\Chipset\vista\ Onboard NVIDIA nForce Networking Controller 65.7.4.0 Including in chipset driver package 1502 Onboard XGI Z9s 6.14.10.0900 \Disk\r5250\onboard\xgiz9s\vista\ ATI FireGL V5200 8.362.0.0 \Disk\R5250\graphic\V5200\vista\ Software Required The management utility for onboard SATA RAID can be found in the EasyBUILD Altos R5250 Installation Configuration Guide 62