Bernina Artista 640 User Guide - Page 28

28 Displays on Screen External Function Buttons Altering Needle Position • left button = needle to the left • right button = needle to the right • keep button pressed to quickly change needle positions • total of 11 needle positions: 5 left, 5 right and 1 center Pattern End • press the Pattern End button • a stop symbol in the right part of the screen indicates that the function was activated • sewing computer stops at the end of the active single pattern or the active pattern of a combination Slide Speed Control • the motor speed can be freely adjusted with the slide Needle Up/Down • basic setting needle stop up • touch the symbol briefly: • the needle is raised or lowered (as when tapping on the foot control with your heel) • touch the symbol longer: • the needle is lowered • the arrow on the screen points down • the sewing computer stops with the needle down • touch the symbol again (also longer): • the needle is raised • the arrow on the screen points up • the sewing computer stops with the needle up Quick Reverse Button on Head Frame • press the Quick Reverse button on head frame • secure the seam beginning and end: sews in reverse as long as button is depressed • used to program buttonhole length • used to program darning length • used to designate end of stitching in straight stitch Securing stitch No. 5 • securing with Quilters Securing Program No. 324 Automatic Thread Cutter • press external button • upper and bobbin thread are cut automatically Start-Stop Button • starts and stops the sewing computer when operating it without foot control • starts and stops the sewing/ embroidery computer in the embroidery mode with attached embroidery module • starts and stops the BSR function (optional) when BSR foot is attached and plugged in