Brother International HL 4040CN Network Users Manual - English - Page 20
Uncon d, Static, Boot Method, IP address, Subnet Mask, Gateway, Windows, Macintosh, Printing
UPC - 012502617785
View all Brother International HL 4040CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
c Double-click the unconfigured device. Windows® Configuring your printer for a network with an Ethernet cable connection Macintosh® 2 Note • If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the device will appear as Unconfigured in the BRAdmin Light utility screen. • You can find the node name and Ethernet address by printing out the Printer Settings Page. See Printing the Printer Settings Page on page 116. d Choose Static from Boot Method. Enter the IP address, Subnet Mask and Gateway (if needed) of your print server. Windows® Macintosh® e Click OK. f With the correctly programmed IP address, you will see the Brother print server in the device list. 13
Configuring your printer for a network with an Ethernet cable connection
13
2
c
Double-click the unconfigured device.
Note
•
If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as
Unconfigured
in the BRAdmin Light utility screen.
•
You can find the node name and Ethernet address by printing out the Printer Settings Page. See
Printing
the Printer Settings Page
on page 116.
d
Choose
Static
from
Boot Method
. Enter the
IP address
,
Subnet Mask
and
Gateway
(if needed) of
your print server.
e
Click
OK
.
f
With the correctly programmed IP address, you will see the Brother print server in the device list.
Windows
®
Macintosh
®
Windows
®
Macintosh
®