Brother International HL 4040CN Network Users Manual - English - Page 85
Network, SETUP, Refresh, the printer are powered on, and then click
UPC - 012502617785
View all Brother International HL 4040CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Wireless configuration for Macintosh® using the Brother automatic installer application m To communicate with the un-configured wireless printer, temporarily change the wireless settings on your computer to match printer's default settings shown on this screen. Check the box after you confirm these settings, and then click Next. 5 Note You can temporarily change the wireless settings on your computer, following the steps below: 1 Click the AirPort status icon and select Open Internet Connect.... 2 Click the Network tab to see the available wireless devices. You can see the Brother wireless print server in the Network option. Select SETUP. 3 Your wireless network is connected successfully. n Choose the printer you wish to configure, and click Next. If the list is blank, check if the access point and the printer are powered on, and then click Refresh. Note The default Node name is "BRNxxxxxx" for the users that temporarily connect with a network cable, or "BRWxxxxxx" for the users that connect without a network cable (where "xxxxxx" are the last six digits of Ethernet address). 78