Brother International ULT-2003D Users Manual - English - Page 130
in the illustration to the right. If there is, a gap, the size of the darning will not
View all Brother International ULT-2003D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
CONTENTS Darning Use this stitch pattern for mending and other applications. 1. Select a stitch pattern. For medium weight fabrics For heavyweight fabrics 1 - 2 - 3 - 4 - 5 - 1 2 4 3 5 6 2. Attach buttonhole foot "A" and set the scale to the desired length of the darning. Note The maximum length of darning is 30 mm (1-3/16 inch). 1 Presser foot scale 2 Completed measurement 3 Width 7 mm (1/4 inch) 4 5 mm (3/16 inch) 6 - 7 - 8 - 3. Check that the needle drops at the desired position and lower the presser foot lever, making sure the upper thread passes underneath the buttonhole foot. CAUTION • Set the presser foot so that there is no gap behind the section marked with an "A" (in the shaded area in the illustration to the right). If there is a gap, the size of the darning will not be correct. • Pass the thread underneath the presser foot. 9 - ?! Index Sewing Utility Stitches 3-57