Brother International ULT-2003D Users Manual - English - Page 296
the proper parts from your authorized dealer., finish, or the needle may break. You can get
View all Brother International ULT-2003D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 296 highlights
CONTENTS 1 5 2 1 1 2 M 4. Remove the race. * While pushing the race towards the back of the machine, lift the edge nearest you and remove the race. 1 Race 1 - 2 - 5. Remove accumulated lint and thread from the inner shuttle and race with a brush or vacuum cleaner. * Do not oil the shuttle or the race. 1 Shuttle 2 Brush 3 - 4 - 6. Check that the notch on the shuttle is in the same position as when you removed the race. Position the race so that the shelf and spring are aligned, and insert the race. CAUTION • Do not use a damaged race or shuttle. Otherwise, the thread may tangle and cause a poor finish, or the needle may break. You can get the proper parts from your authorized dealer. • Be sure to insert the race in the correct position. Otherwise, the needle may break. 1 Shelf 2 Spring 5 - 6 - 7 - 8 - 9 - ?! 7. Reattach the needle plate. Index Care and Maintenance 8-3