Brother International ULT-2003D Users Manual - English - Page 199

Attaching the Embroidery Frame CAUTION Wind and set the bobbin before attaching the embroidery frame. Use embroidery thread in the bobbin. CONTENTS 1 - 1. Raise the presser foot lever. 2 - 3 - 1 2 2. Align the embroidery frame guide with the right edge 4 - of the embroidery frame holder. 1 Embroidery frame holder 2 Embroidery frame guide 5 - 1 2 1 2 5-24 6 - 3. While pressing the embroidery frame holder to the left, slide the embroidery frame into the holder. 7 - 8 - 4. Align the projection on the embroidery frame holder with the groove in the embroidery frame, and return the embroidery frame holder to the original position. 1 Projection 2 Groove 9 - ?! CAUTION If the embroidery frame is set in the frame holder incorrectly, the frame may strike the presser foot, resulting in injury. Embroidery Index