Brother International ULT-2003D Users Manual - English - Page 96
Overcasting Using Presser Foot, the needle does not touch the presser foot. If
View all Brother International ULT-2003D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
CONTENTS Overcasting Use for the beginning and end of seams in skirts or trousers, and the beginning and end of all cuttings. Use presser foot "G", presser foot "J", or the side cutter attachment depending on the kind of overcasting stitch you select. I Overcasting Using Presser Foot "G" 1. Select a stitch pattern. For sewing light and medium weight fabrics 1 - 2 - For sewing heavyweight fabrics 3 - For sewing medium or heavyweight and easily-frayable fabric 4 - 5 - 6 - 5 2. Attach presser foot "G". Lower the presser foot so that 7 - the presser foot guide is exactly against the edge of the 6 fabric. 5 6 1 3. Sew along the presser foot guide. 1 Guide CAUTION After the stitch width is adjusted, turn the balance wheel toward you by hand and check that the needle does not touch the presser foot. If the needle hits the presser foot the needle may break and cause injury. G 1 The needle should not touch 1 8 - 9 - ?! Index Sewing Utility Stitches 3-23