Brother International ULT-2003D Users Manual - English - Page 133

CONTENTS 4. Check the first needle drop point and lower the presser 1 - foot. 1 2 mm (1/16 inch) 2 - 1 3 - 5. Lower the buttonhole lever so that it is positioned be- 5 hind the metal bracket on the buttonhole foot. 1 Metal bracket 6 4 - 5 6 6 1 2 1 5 - 6. Gently hold the end of the upper thread and begin sewing. When sewing is completed, the machine will sew reinforcement stitches and stop automatically. 6 - 7 - Bar Tacks on Thick Fabrics Place a piece of folded fabric or cardboard beside the fabric being sewn to level off the buttonhole foot and allow for easier feeding. 8 - Note If automatic thread cutting is turned on before you start sewing, both threads are automatically cut after the reinforcement stitches are sewn. If the fabric does not feed (for example, because it is too thick), increase the stitch length setting. 9 - ?! 1 Presser foot 2 Thick paper 3-60 Sewing Utility Stitches Index