Brother International ULT-2003D Users Manual - English - Page 85
Saving Your Preferred Stitch Settings, If you do not press
View all Brother International ULT-2003D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
CONTENTS I Saving Your Preferred Stitch Settings The settings for zigzag stitch width, stitch length, thread tension, automatic thread cutting or automatic reinforcement stitching, etc., are preset by the computer for each stitch pattern. If you want to change those settings, input the new settings and press change. The new settings will replace the computer settings. for each pattern you want to 1 - 2 - Example: You always use a length setting of 2.0 mm (1/16 inch) for a straight stitch 1. Select the straight stitch. 2. Set the length to 2.0 mm (1/16 inch), and press . 3 - 3. Press , and go back to the original screen, or turn off the machine. The next time you select the same straight stitch, the 4 - stitch length setting should be 2.0 mm, as you saved it. CAUTION • You can change any of the settings on the 5 - screen in the same manner. 6 - • If you do not press or after saving the new stitch settings, the new stitch settings will be displayed whenever you 7 - select that stitch, even after turning off the power. * Press to return to the original machine settings. Then press to memorize these settings. 8 - 9 - ?! 3-12 Sewing Utility Stitches Index