Brother International ULT-2003D Users Manual - English - Page 294

CONTENTS Chapter 8 Care and Maintenance CHANGING THE LIGHT BULB CAUTION • Turn off the main power switch and unplug the machine before changing the light bulb. If the machine is on and the "Start/Stop" button is pressed accidentally, injuries may result. • To avoid burns, give the light bulb time to cool before changing it. 1 - 2 - 2 1. Turn off the main power switch. 2. Use a screwdriver to loosen the screw on the back of machine light cover. Then remove the light cover. 3 - 1 Screw 2 Light cover 4 - 1 3. Remove the light bulb as shown, and align the projection on the light bulb with the notch in the socket. Replace it with a new light bulb. CAUTION Use only light bulbs intended for use with this machine (12V/ 5W: part code XA2037001). You can get the proper light bulb at your authorized dealer. 5 - 6 - 4. Place light cover and tighten the screw on the back of the machine. 7 - 8 - 9 - ?! Index Care and Maintenance 8-1