Brother International ULT-2003D Users Manual - English - Page 281
If you make a mistake while setting points, press the, key to, erase the last point set.
View all Brother International ULT-2003D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 281 highlights
CONTENTS 3. Select whether one stitch or three stitches will be sewn between 1 - the first two points. To sew one stitch, press so that it ap- pears as ; to sew three stitches, touch the key so that it ap- pears as . 2 - 4. Use the keys to move to the coordinates of the first 3 - point that was made on the grid sheet (from step 2 on page 7-1). 5. Press to add the point indicated by . 4 - 5 - 6. Repeat steps 3 through 5 for each point that you have drawn on the grid sheet until the stitch design is drawn on the screen as a continuous line. Note If you make a mistake while setting points, press the erase the last point set. key to 7. Once you have finished entering the stitch data, press the key. 6 - 7 - 8 - 9 - ?! 7-4 My Custom Stitch Index
7-4
My Custom Stitch
1
—
2
—
3
—
4
—
5
—
6
—
7
—
8
—
?
!
9
—
CONTENTS
Index
3.
Select whether one stitch or three stitches will be sewn between
the first two points. To sew one stitch, press
so that it ap-
pears as
; to sew three stitches, touch the key so that it ap-
pears as
.
4.
Use the
keys to move
to the coordinates of the first
point that was made on the grid sheet (from step 2 on page 7-1).
5. Press
to add the point indicated by
.
6.
Repeat steps 3 through 5 for each point that you have drawn on
the grid sheet until the stitch design is drawn on the screen as a
continuous line.
Note
If you make a mistake while setting points, press the
key to
erase the last point set.
7.
Once you have finished entering the stitch data, press the
key.