Brother International ULT-2003D Users Manual - English - Page 92
Basting, length of top and bobbin thread out from the rear
View all Brother International ULT-2003D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
CONTENTS Basting 6 1. Select . 1 - 2 - 3 - 4 - 5 - 2. Attach presser foot "J". Press the "Reverse/ Reinforcement Stitch" button to sew reinforcement stitches, then continue sewing. Note • If you do not want to use a reinforcement stitch at the beginning, you should lift the presser foot, rotate the balance wheel, pull up the bobbin thread and pull a length of top and bobbin thread out from the rear of the machine. • You can set the stitch length between 5 mm (3/16 inch) and 30 mm (1-3/16 inch) 1 Between 5mm (3/16 inch) and 30 mm (1-3/16 inch) 6 - 7 - 8 - 1 3. Sew while keeping the fabric pulled tight. 4. End the basting with reinforcement stitches. 9 - ?! Index Sewing Utility Stitches 3-19
Sewing Utility Stitches
3-19
1
—
2
—
3
—
4
—
5
—
6
—
7
—
8
—
?
!
9
—
CONTENTS
Index
6
1
Basting
1. Select
.
2.
Attach presser foot “J”. Press the “Reverse/ Reinforce-
ment Stitch” button to sew reinforcement stitches, then
continue sewing.
Note
•
If you do not want to use a reinforcement stitch at the
beginning, you should lift the presser foot, rotate the
balance wheel, pull up the bobbin thread and pull a
length of top and bobbin thread out from the rear of
the machine.
•
You can set the stitch length between 5 mm (3/16 inch)
and 30 mm (1-3/16 inch)
1
Between 5mm (3/16 inch) and 30 mm (1-3/16 inch)
3.
Sew while keeping the fabric pulled tight.
4.
End the basting with reinforcement stitches.