Brother International ULT-2003D Users Manual - English - Page 70
Setting the Thread Tension, Proper Thread Tension, If you change the thread tension setting
View all Brother International ULT-2003D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
CONTENTS Setting the Thread Tension Your machine will automatically set the thread tension when you select a stitch. However, you may need to change the thread tension, depending on the fabric and thread being used. I Proper Thread Tension 1 2 3 4 The upper and lower threads should cross near the center of the fabric. If thread tension is not properly set, the seam may have a poor finish or the fabric may pucker. 1 Reverse side 2 Surface 3 Upper thread 4 Bobbin thread 1 - 2 - 3 - 4 - 5 - 3 2 4 1 4 3 1 2 If the upper thread tension is too strong (the bobbin thread can be seen on the top side of the fabric), press the key. 1 Bobbin thread 2 Upper thread 3 Surface 4 Locks appear on surface of fabric If the upper thread tension is too weak (the upper thread can be seen on the bottom side of the fabric), press the key. 1 Upper thread 2 Bobbin thread 3 Reverse side 4 Locks appear on reverse side of fabric Note If you change the thread tension setting, but turn off the power or select another stitch afterwards, the thread tension will return to the default setting. 6 - 7 - 8 - 9 - ?! Index Getting Ready to Sew 2-13