Brother International ULT-2003D Users Manual - English - Page 15
Balance Wheel, Needle Position, Button Needle up / Needle down, Reverse/Reinforcement Stitch, Button
View all Brother International ULT-2003D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
I Balance Wheel CONTENTS "Needle Position" Button (Needle up / Needle down) Use this button when changing sewing direction or for detailed sewing in small areas. Press this button to raise or lower the needle position. Press the button twice to sew a single stitch. 1 - 2 - "Reverse/Reinforcement Stitch" Button Use this button to sew reinforcement stitches at the beginning and end of sewing. Press this button, and the machine sews 3 stitches in the same spot and stops automatically. For straight and zigzag stitch patterns that take reverse stitches, the machine will sew reverse stitches at low speed only while holding down the "Reverse/Reinforcement Stitch" button (the stitches are sewn in the opposite direction from the main seam). (See page 2-3.) 3 - 4 - START STOP "Start/Stop" Button Press this button and the machine will sew a few stitches at a slow speed, then begin sewing at the speed set by the sewing speed controller. Press the button again to stop the machine. Hold the button down to sew at the machine's slowest speed. The button changes color according to the machine's operation mode. Green : the machine is ready to sew or is sewing. Red : the machine can not sew. 5 - 6 - Turn the balance wheel to raise or lower the needle. The 1 wheel should be turned toward the front of the machine. 1 Balance wheel 7 - 8 - 9 - ?! 1-4 Setting Up Index