Brother International ULT-2003D Users Manual - English - Page 59
Thread Cutter, thread or break the needle and damage the ma
View all Brother International ULT-2003D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
CONTENTS 7. Press the "Start/Stop" button to begin sewing. 1 - 5 * Guide the fabric lightly by hand. 2 - 6 8. Press the "Start/Stop" button again to stop sewing. 3 - 4 - 5 - 9. Press the "Thread Cutter" button to trim the threads. * The needle will return to the up position automatically. CAUTION 6 - Do not press the "Thread Cutter" button after the threads have been cut. Doing so could tangle the thread or break the needle and damage the machine. 7 - CAUTION • Do not press the "Thread Cutter" button when there is no fabric set in the machine or during machine operation. The thread may tangle, resulting in damage. • When cutting thread thicker than #30, nylon thread, or other decorative threads, use the thread cutter on the side of the machine. 8 - 9 - ?! 10.When the needle has stopped moving, raise the presser foot and remove the fabric. Note This machine has a display to warn you when the bobbin thread has run out. If the warning displays, re-thread the machine immediately. Index 2-2 Getting Ready to Sew