Brother International ULT-2003D Users Manual - English - Page 14

CONTENTS I Embroidery Unit Carrying Case When opening the embroidery unit carrying case, be sure to unhook the two latches. When closing the carrying case, press in on the latches until each one clicks twice to make sure that they are fully secured. 1 Latches 1 - 2 - 1 3 - 3 2 789 64 5 1 1 Embroidery unit 2 Embroidery frame (large) 3 Embroidery frame (medium plus) 4 Embroidery frame (medium) 5 Embroidery frame (small) 6 Sheet large 7 Sheet medium plus 8 Sheet medium 9 Sheet small 4 - 5 - I Operation Buttons START STOP "Thread Cutter" Button Press this button after sewing to automatically trim the excess thread. CAUTION Do not repeat thread cutting after the threads are cut. The thread may tangle or the needle may break, resulting in damage. CAUTION • Do not press the "Thread Cutter" button when there is no fabric in the machine or during machine operation. The thread may tangle resulting in damage. • When cutting thread thicker than #30, nylon thread, or other specialty threads, use the thread cutter on the side of the machine. 6 - 7 - 8 - 9 - ?! Index Setting Up 1-3