Brother International ULT-2003D Users Manual - English - Page 295

CLEANING THE MACHINE CAUTION Be sure to unplug the machine before cleaning it. Otherwise, electric shock or injury may result. CONTENTS 1 - I Cleaning the LCD Screen If the screen is dirty, gently wipe it with a soft, dry cloth. Do not use organic solvents or detergents. 2 - I Cleaning the Machine Casing If the surface of the machine is dirty, lightly soak a cloth in a neutral detergent, squeeze it out firmly and then wipe the surface. Then wipe again with a dry cloth. I Cleaning the Race and Shuttle If dust or bits of dirt collect in the race or shuttle, the machine will not run well, and the bobbin thread detection function may not operate. Keep the machine clean for best results. 3 - 1. Turn off the power. Remove the presser foot holder and 4 - the needle. 1 5 - 2 5 2. Loosen the screws with the disc-shaped screwdriver and remove the needle plate. 1 Needle plate 6 - 7 - 1 8 - 1 2 3. Turn the balance wheel, and align the notch of shuttle a little to the left of the shelf of race, as shown. CAUTION Be sure to turn the balance wheel towards the front of the machine. Turning the balance wheel in the other direction may damage the machine. 9 - ?! 1 Notch of shuttle 2 Shelf of race 8-2 Care and Maintenance Index