Brother International ULT-2003D Users Manual - English - Page 215
MAKING EMBROIDERY ADJUSTMENTS, If the Upper Thread Tension is Too Strong
View all Brother International ULT-2003D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
MAKING EMBROIDERY ADJUSTMENTS Adjusting Thread Tension When embroidering, the thread tension should be set so that the upper thread can slightly be seen on the wrong side of the fabric. CONTENTS 1 - I Correct Thread Tension The pattern can be seen from the wrong side of the fabric. If the thread tension is not set correctly, the pattern will not finish well. The fabric may pucker or the thread may break. 2 - 3 - (right side) (wrong side) Follow the operations described below to complete the revisions, according to the situation. CAUTION If the thread tension setting is made extremely weak, the machine may stop during sewing. This is not the sign of a malfunction. Increase the thread tension slightly, and begin sewing again. Note • If you turn off the power or select a different pattern, the thread tension will reset to the auto- matic setting. • When you retrieve a saved pattern, the thread tension setting will be the same as when the pattern was saved. 4 - 5 - 6 - I If the Upper Thread Tension is Too Strong The bobbin thread will show on the right side of the fabric. 7 - (right side) (wrong side) Press to weaken the upper thread tension. 8 - 9 - ?! 5-40 Embroidery Index