Brother International ULT-2003D Users Manual - English - Page 309

9-12 17. This message is displayed when the buttonhole lever is up, a buttonhole stitch is selected, and the "Start/ Stop" button or "Reverse/Reinforcement Stitch" button is pushed. 18. This message is displayed when there are too many characters and the curved character configuration is impossible. 19. This message is displayed when the machine is in embroidery mode and the combined character pattern is too large for the embroidery frame. You can rotate the pattern 90 degrees and continue combining characters. 20. This message is displayed when the machine is in embroidery mode, and the character pattern combination is too large to fit in the embroidery frame. 21. This message is displayed when the machine is in embroidery mode and the small frame is attached, and the selected pattern does not fit in the small frame. Troubleshooting CONTENTS 22. This message is displayed when, with the machine in embroidery mode and the small embroidery frame or medium embroidery frame attached, the selected pattern is larger than the embroidery area of the medium embroidery frame. 1 - 2 - 23. This message is displayed when, with the machine in embroidery mode and the small embroidery frame, medium embroidery frame or medium plus embroidery frame attached, the selected pattern is larger than the embroidery area of the medium plus embroidery frame. 24. This message is displayed when the machine is in embroidery mode and the embroidery unit tries to initialize while the embroidery frame is attached. 3 - 4 - 5 - 6 - 25. This message is displayed when the machine is ready to sew an embroidery pattern, and the "Start/Stop" button is pushed while the embroidery frame is not attached. 7 - 8 - 26. This message is displayed when the bobbin is being wound, and the motor locks because the thread is tangled, etc. 9 - ?! Index