Canon EOS 20D EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 83

Shot Settings You can specify various shot settings, such as processing parameters, tone curve, personal white balance settings, color matrix, and JPEG quality, and then apply these settings to the camera. 1 Display the [Camera settings] dialog box (W-56). 2 Select the [Shoot settings] tab. ¿ The [Shoot settings] tab sheet W appears. O With the EOS-1Ds and EOS-1D, select the [Detailed Settings] tab. 3 Click one of the buttons to display each dialog box. Specifying Camera Settings in the EOS Viewer Utility Allows you to select tone curves, specify the sharpness and contrast, and then register these settings on the camera 4 (W-78). Loads the saved tone curves, and allows you to select color channels and register them on the camera (W-80). Loads the personal white balance settings, and then registers them on the camera (W-82). Allows you to select color matrix settings and then register them on the camera (W-84). Allows you to specify JPEG quality settings (L, M1, M2, S), and register them on the camera (W-86). Applies the settings that you have specified in the [Shoot settings] tab sheet to the camera. * With the EOS-1Ds and EOS-1D, the [Apply] button is displayed. Applies the settings that you have specified in all the tab sheets to the camera and closes the [Camera settings] dialog box. Restores the parameters to their original ones and closes the [Camera settings] dialog box. O With the EOS-1Ds and EOS-1D, the [Tone curve], [Color matrix] and [JPEG quality] buttons are not displayed. 4 Click the [OK] button. ¿ The settings are applied to the camera and the [Camera settings] dialog box closes. W-77