Canon PIXMA mini260 Photo Printing Guide - Page 56

Language selection, Reset setting, Save settings, Load settings, Read/write attribute

Page 56 highlights

Read/write attribute Selects whether to allow data to be written onto memory cards from a computer. Important When you write the data on the memory card, connect the printer with the AC adapter. The printer cannot be set to the Read/write mode with using the optional battery. The printer can be set to the Read/write mode when using both the AC adapter and optional battery, but do not remove the AC adapter when you write the data on the memory card. If you set this setting to Read/write mode, card direct printing cannot be done. After you finish operation of the memory card dedicated drive, be sure to set it back to Read-only mode. And also, when you turned off the printer, the Read/write mode will be canceled and the setting is returned to the Read-only mode when you turn on the printer next time. Slide show setting Selects Image quality: Standard or Image quality: High for the image display quality of the slide show. Note When Image quality: High is selected, it may take time until images are displayed. Language selection Changes the language for LCD messages and menus. Reset setting You can change the settings back to the default, except for the LCD language and the position of the Print Head. Save settings Saves the settings for the settings screen. Load settings Loads the settings for the settings screen. 54 Changing the Printer Settings

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92

54
Changing the Printer Settings
±
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
±
Slide show setting
Selects
Image quality: Standard
or
Image quality: High
for the image display quality of the
slide show.
Language selection
Changes the language for LCD messages and menus.
Reset setting
You can change the settings back to the default, except for the LCD language and the position of the
Print Head.
Save settings
Saves the settings for the settings screen.
Load settings
Loads the settings for the settings screen.
Important
z
When you write the data on the memory card, connect the printer with the AC adapter. The
printer cannot be set to the
Read/write mode
with using the optional battery. The printer can
be set to the
Read/write mode
when using both the AC adapter and optional battery, but do
not remove the AC adapter when you write the data on the memory card.
z
If you set this setting to
Read/write mode
, card direct printing cannot be done. After you finish
operation of the memory card dedicated drive, be sure to set it back to
Read-only mode
. And
also, when you turned off the printer, the
Read/write mode
will be canceled and the setting is
returned to the
Read-only mode
when you turn on the printer next time.
Note
When
Image quality: High
is selected, it may take time until images are displayed.