Canon PIXMA mini260 Photo Printing Guide - Page 68
Printer Does Not Start or Stops During Print Jobs, Colors Are Uneven or Streaked
View all Canon PIXMA mini260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Cause Media Type setting in the Operation Panel does not match the actual type of paper. Action Check that the Media Type set in the Operation Panel matches the type of the loaded printing paper. If you notice abrasion even with the media type set correctly to match the loaded paper, set the Paper Thickness Lever to the right. Colors Are Uneven or Streaked Cause Print quality is not set appropriately. Action In the Operation Panel, set Print quality to High (qualitypriority). Especially when printing a document that requires a lot of ink, increasing the Print Quality setting is effective in reducing uneven colors. Printer Does Not Start or Stops During Print Jobs Printing Does Not Start Cause Ink tank is empty. Ink tank is not installed securely. Action An ink tank is not installed properly, or is out of ink. Confirm the error message displayed on the LCD and take the appropriate action to resolve the error. If the ink lamp is not lit, press the mark on the ink tank until it clicks into place. The ink lamp lights up red when the ink tank is fully inserted. Printing Stops Before It Is Completed Cause Out of paper Action Make sure that paper is loaded. If paper has run out, load paper. 66 Troubleshooting