Canon PowerShot SX230 HS PowerShot SX230 HS / SX220 HS Camera User Guide
Canon PowerShot SX230 HS Manual
View all Canon PowerShot SX230 HS manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon PowerShot SX230 HS manual content summary:
- Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 1
Camera User Guide • Make sure you read this guide, including the "Safety Precautions" section, before using the camera. • Reading this guide will help you learn to use the camera properly. • Store this guide safely so that you can use it in the future. ENGLISH - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 2
the camera. Camera Battery Pack NB-5L (with Terminal Cover) Battery Charger CB-2LX/CB-2LXE Interface Cable IFC-400PCU Stereo AV Cable AVC-DC400ST Wrist Strap WS-DC11 Getting Started DIGITAL CAMERA Solution Disk Warranty Card Using the PDF Manuals The following PDF manuals are included - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 3
effective in the country of sale. If there is a problem with the camera while abroad, please return it to the country of sale before proceeding with a warranty claim to a Canon Customer Support Help Desk. For Canon Customer Support contacts, please see the customer support list supplied with your - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 4
Shoot with special effects Super vivid colors (p. 69) Poster Effect (p. 69) Fish-eye Effect (p. 70) Miniature Effect (p. 70) Toy Camera Effect (p. 71) Monochrome (p. 72) z Focus on faces 24, 65, 91 z Shoot in places where I cannot use the flash (turn off the flash 54 z Take pictures with me - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 5
32 z Shoot fast moving subjects and play them back in slow motion 117 2 Print z Easily print pictures 152 Save z Save images to a computer 33 3 Other z Turn off sounds 48 z Use the camera abroad 15, 169 z Understand what is displayed on the screen 184 z Use the GPS function SX230 HS 102 5 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 6
Adjusting the Screen Brightness ..... 50 Returning the Camera to Default Settings 51 Power Saving Function (Auto Power Down 52 Clock Functions 52 3 Shooting with Commonly Used Functions 53 Turning the Flash Off 54 Zooming in More Closely on Subjects (Digital Zoom 55 Inserting the Date and Time - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 7
the FE Lock 98 Adjusting the Flash Exposure Compensation 99 Shooting with Slow Synchro ......... 100 Red-Eye Correction 100 Checking for Shut Eyes 101 Shooting Using a TV as the Display 101 Using the GPS Function SX230 HS 102 6 Getting More Out of Your Camera 107 Setting the Shutter Speed - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 8
Printing (DPOF 159 10 Customizing Camera Settings 163 Changing Camera Settings 164 Changing Shooting Function Settings 171 Changing Playback Function Settings 174 11 Useful Information ..........175 Using Household Power 176 Using an Eye-Fi Card 177 Troubleshooting 179 List of Messages That - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 9
to as memory cards in this guide. • Functions that differ depending on the camera model are indicated with the following icons: SX230 HS Functions and precautions for the PowerShot SX230 HS only. SX2320 HS Functions and precautions for the PowerShot SX220 HS only. Explanations without these icons - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 10
with the camera interior, immediately turn the camera power off and remove the battery. If the battery charger becomes wet, unplug it from the outlet and consult your camera distributor or a Canon Customer Support Help Desk. • Use only the recommended battery. • Do not place the battery near or - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 11
lens. This could lead to injury or damage the camera. • Be careful not to subject the screen to strong impacts. If the screen cracks, injury may result from the broken fragments. • When using the flash may cause deformation of the camera or battery charger casing. • The slideshow transition effects - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 12
are not using the camera. If the battery is left inside the camera, damage caused by leakage may occur. • Before you discard the battery, cover the terminals with tape or other insulators. Contacting other metal materials may lead to fire or explosions. • Unplug the battery charger from the power - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 13
the Strap/Holding the Camera • Attach the included strap and wrap it around your wrist to avoid dropping the camera during use. • Keep your arms tight against your body while holding the camera firmly by the sides when shooting. Be sure that your fingers do not block the flash while it is raised - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 14
has finished. Charging takes approx. 2 hours and 5 minutes. Remove the battery. z Unplug the battery charger from the power outlet, then remove the battery by sliding it in ( ) and up ( ). To protect the battery and prolong its life, do not charge it for longer than 24 hours continuously. 14 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 15
of the battery and does not indicate a problem. However, if the battery bulges to the point where it will no longer fit into the camera, please contact a Canon Customer Support Help Desk. • If the battery is quickly depleted even after charging, it has reached the end of its life span. Purchase - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 16
supports SDXC memory cards beforehand. About Eye-Fi Cards This product is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case check with the card manufacturer. Inserting the Battery and Memory Card Insert the included battery and a memory card (sold separately). - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 17
not properly lock into place. Terminals Battery lock Insert the memory card. z Insert the memory card as shown until it locks into place with a click. z Be sure the memory card is oriented correctly. Inserting the memory card in the wrong direction could damage the camera. Label Close the cover - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 18
Card Removing the Battery and Memory Card Remove the battery. z Open the cover and press the battery lock in the direction of the arrow. X The battery will pop up • The number of shots that can be taken will vary depending on camera settings, the subject and the memory card used. Can you check the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 19
. Complete the setting. z Press m to complete the setting. After a confirmation screen appears, the shooting screen will reappear. z Pressing the power button will turn off the camera. Reappearing Date/Time screen Set the correct date and time. If you have not set the date and time and the home time - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 20
4 hours even if the camera is not turned on. • If the date/time battery is depleted, the Date/Time screen will appear when you turn the camera on. Follow the steps on p. 19 to set the date and time. You can also automatically update the date and time with the GPS function (p. 106). SX230 HS 20 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 21
. Display the settings screen. z Press and hold the m button, then immediately press the n button. Set the display language. z Press the opqr buttons or turn the  dial to choose a language, then press the m button. X Once the display language has been set, the settings screen will close. What if - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 22
formatted in other devices, you should format the card with this camera. Formatting (initializing) a memory card erases all data on the tab. z Press the op buttons or turn the  dial to choose [Format], then press the m button. Choose [OK]. z Press the qr buttons or turn the  dial to choose [OK], - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 23
being taken while the shutter sound plays, be careful not to move the camera. Does the length of the shutter sound change? • Since the time required to take, the length of the shutter sound may change. • If the camera or subject moves while the shutter sound is playing, the recorded image may be - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 24
color and brightness to optimal levels. Turn on the camera. z Press the power button. X The flash will automatically rise and the start-up screen will appear. z You can also raise or lower the flash manually (the flash camera will focus on detected subjects and display frames on them. X Black bars - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 25
Press the shutter button fully to shoot. X The camera will play the shutter sound and shoot. The flash will automatically fire in low light conditions if it shutter button again. What if... • What if the color and brightness of the images do not turn out as expected? The scene icon (p. 185) that - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 26
continuously adjust (Servo AF). • What if a flashing appears? Attach the camera to a tripod so that the camera does not move and blur the image. • What if the camera does not play any sounds? Pressing the l button while turning on the camera power will turn off all sounds except for warning sounds - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 27
1 minute elapses. If the flash has been raised, the flash will lower. z Pressing the 1 button again while the lens is retracted will turn off the power. Switching to Shooting mode Pressing the shutter button halfway, or turning the mode dial in Playback mode switches the camera to Shooting mode. 27 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 28
an image. Enter Playback mode. z Press the 1 button. X The last image you took will appear. Choose an image to erase. z Press the qr buttons or turn the  dial to display an image to erase. Erase the image. z After pressing the m button, press the op buttons or - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 29
. This prevents incorrect operation of the camera, allowing even beginners to take and view worry-free pictures. Shooting z Set the mode dial to 9. z Follow Steps 3 - 5 on pp. 24 - 25 to shoot (no sound will play). z Press the r button to turn off the flash. ! will appear on the screen. Pressing - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 30
Shooting Movies The camera will determine the subject and shooting conditions, and select the best settings for the scene. Choose to full-screen, and the area displayed on the screen will be recorded. X The camera will beep once, recording will start, and [ Rec] and the elapsed time will appear - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 31
than the movie button while shooting. The sound the buttons make will be recorded in the movie. Stop shooting. z Press the movie button again. X The camera will beep twice and stop shooting the movie. X The movie will record to the memory card. X Shooting will automatically stop when the memory card - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 32
the m button, the movie will pause and the movie control panel will appear. Press the qr buttons or turn the  dial to choose (Play), then press the m button to resume playback. z Press the op buttons play back the movie smoothly with the camera. For enhanced playback you can also connect the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 33
Canon-brand compact digital camera, install the software from the included CD-ROM, overwriting your current installation. System Requirements Windows OS Computer model CPU RAM Interface Free Hard Disk Space Display Windows 7 Windows Vista Service 50 MB or more SX230 HS Movie Uploader for YouTube: - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 34
or more Map Utility: 50 MB or more SX230 HS Movie Uploader for YouTube: 30 MB or more DIGITAL CAMERA Solution Disk) (p. 2) into the computer's CD-ROM drive. Begin installation. z Click [Easy Installation] and follow the on-screen instructions to proceed with the installation. z If the [User - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 35
supplied CD-ROM (DIGITAL CAMERA Solution Disk) (p. 2) into the computer's CD-ROM drive. Begin installation. z Double-click the on the CD. z Click [Install], and follow the on-screen instructions to proceed with the installation. Connect the camera to the computer. z Turn off the camera. z Open the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 36
Transferring Images to a Computer for Viewing Turn on the camera. z Press the 1 button to turn on the camera. Open CameraWindow. Windows z Click [Downloads Images From Canon Camera using Canon CameraWindow]. X CameraWindow will appear. z If CameraWindow does not appear, click the [Start] menu and - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 37
to a computer. • There may be problems transferring images or image information correctly depending on the version of the operating system in use, the file size, or the software in use. • GPS log files (p. 104) may not transfer correctly. SX230 HS • Some functions in the included software may - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 38
Accessories Supplied with Camera Wrist Strap WS-DC11 Battery Pack NB-5L Battery Charger with Terminal Cover* CB-2LX/CB-2LXE* DIGITAL CAMERA Solution Disk Stereo AV Cable AVC-DC400ST* Interface Cable IFC-400PCU* *Also available for purchase separately. Memory Card USB card reader Windows/ - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 39
Accessories Abroad The battery charger and the AC adapter kit can be used in regions that have 100 - 240 V (50/60 Hz) AC power. If the plug does not fit the outlet, use a commercially available plug adapter. Do not use electrical transformers for foreign travel as they will cause damage. Flash - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 40
not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 41
2 Learning More This chapter explains the parts of the camera and what appears on the screen, as well as the basic operating instructions. 41 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 42
) (pp. 24, 30, 55) Playback: k (Magnify) / g (Index) (pp. 124, 128) Shutter Button (p. 23) GPS Signal Receiver (p. 103) SX230 HS Speaker Flash (pp. 54, 82) Tripod Socket DC Coupler Terminal Cover (p. 176) Memory Card / Battery Cover (p. 16) Strap Mount (p. 13) Mode Dial Use the mode dial to change - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 43
(pp. 30, 113) b (Exposure Compensation) (p. 83) / o Button e (Macro) (p. 93) / f (Manual Focus) (p. 96) / q Button Control Dial (see below) m FUNC./SET Button (p. 46) h (Flash) (pp. 82, 100) / r Button Q (Self-Timer) (p. 58) / p Button Control Dial Turning the control dial allows you to perform - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 44
You can change the display that appears first by pressing the n button, then choosing [Review Info] from the 4 tab (p. 172). Screen Display in Dark Shooting Conditions The display automatically Playback In Detailed Information Display (p. 186), overexposed areas of the image flash on the screen. 44 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 45
way you can judge the exposure. GPS Information Display SX230 HS z If you press the o camera (p. 43) will light or blink depending on the camera's status. Colors SX230 HS . When the indicator blinks green, do not turn off the power, open the memory card slot/battery cover, shake or jolt the camera - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 46
press the m or r button. z Choosing some menu items changes the screen to display further menu options. Choose an option. z Press the op buttons or turn the  dial to choose an option. z You can also choose settings by pressing the l button on options that display . z To return to the menu items - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 47
. z Press the n button. Choose a tab. z Move the zoom lever or press the qr buttons to choose a tab. Choose an item. z Press the op buttons or turn the  dial to choose an item. z Some items require you to press the m or r button to display a submenu in which you change the setting. Choose - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 48
the qr buttons to choose [On]. z Press the n button to restore the normal screen. • You can also mute camera sounds by holding down the l button and turning on the power. • If you mute camera sounds, the sound will also be muted when playing back movies (p. 32). If you press the o button while - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 49
n button. Choose [Volume]. z Move the zoom lever to choose the 3 tab. z Press the op buttons or turn the  dial to choose [Volume], then press the m button. Change the volume. z Press the op buttons or turn the  dial to choose an item, then press the qr buttons to adjust the volume. z Press the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 50
the zoom lever to choose the 3 tab. z Press the op buttons or turn the  dial to choose [LCD Brightness]. Adjust the brightness. z Press the qr to return the screen to the original brightness. • The next time you turn on the camera, the screen will be at the brightness setting chosen from the 3 tab - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 51
settings. z Press the qr buttons or turn the  dial to choose [OK], then press the m button. X The camera will reset to the default settings. Are . • The recorded custom white balance data (p. 84). • Colors that were chosen in Color Accent (p. 73) or Color Swap (p. 74). • The scene mode chosen in K - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 52
) To save battery power, the screen turns off, and the camera shuts down automatically when it is not operated for a certain time. Power Saving during Shooting The screen will turn off approximately 1 minute after you stop operating the camera. After about 2 more minutes, the lens will retract and - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 53
3 Shooting with Commonly Used Functions This chapter explains how to use common functions, such as the selftimer, and how to turn off the flash. • This chapter assumes that the camera is set to A mode. When shooting in another mode, check which functions are available in that mode (pp. 188 - 195). - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 54
shutter button halfway in low light conditions where camera shake is likely, a flashing will appear on the screen. Attach the camera to a tripod to prevent it from moving. • You can also lower the flash manually so that it does not fire (p. 24). • If the flash is lowered, the setting screen will not - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 55
the screen when you release the zoom lever. Move it toward i again. X The digital zoom will zoom in even further on the subject. Turning off the digital zoom To turn off the digital zoom, press the n button to choose [Digital Zoom] from the 4 tab, then choose [Off]. The focal length when using the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 56
will cause images to appear coarse (the zoom factor will appear in blue). Display the menu. z Press the n button. Choose [Digital Zoom]. z Move the zoom lever to choose the 4 tab. z Press the op buttons or turn the  dial to choose [Digital Zoom]. Choose the setting. z Press the qr buttons to choose - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 57
button. Choose [Date Stamp]. z Move the zoom lever to choose the 4 tab. z Press the op buttons or turn the  dial to choose [Date Stamp]. Choose the setting. z Press the qr buttons to choose [Date] or to print. Refer to the Software Guide for details. • Print using printer functions (p. 151). 57 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 58
. The camera will shoot approximately 10 seconds after the shutter button is pressed. Press the p button. Choose Ò. z Press the op buttons or turn the  the lamp and sound speed up (the lamp remains lit when the flash will fire). z To cancel shooting with the self-timer after the countdown - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 59
Camera Shake The camera will shoot approximately 2 seconds after the shutter button is pressed, preventing any camera to choose [Delay] or [Shots]. z Press the qr buttons or turn the  dial to choose a value, then press the m button with the first shot. • If the flash fires or you set a high number of - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 60
pixel settings. Choose the recording pixel setting. z After pressing the m button, press the op buttons or turn the  dial to choose , then press the m button again. Choose an option. z Press the op buttons or turn the  dial to choose an option, then press the m button. X The setting will appear on - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 61
(Small) 0.3 M/640 x 480 150 20116 82367 84 30174 123550 • The values in the table are measured according to Canon standards and may change depending on the subject, memory card and camera settings. • The values in the table are based on 4:3 aspect ratio. If the aspect ratio is changed (p. 86 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 62
62 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 63
4 Adding Effects and Shooting in Various Conditions This chapter explains how to add effects and how to shoot in various conditions. 63 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 64
not recorded? If you take a picture just after turning on the camera, choosing otherwise operating the camera, a movie may not be recorded. Viewing movies the battery will be depleted more quickly than in A mode. • The image quality will be fixed at for movies shot in mode. • In the following cases, - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 65
Shooting in Various Conditions The camera will select the necessary settings for the conditions in which you wish to shoot when you choose the matching mode. Choose a Shooting mode. z Set the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 66
Shooting in Special Scenes The camera will select the necessary settings for the conditions in which you wish to shoot when you choose the matching mode. Enter K mode. z Set the mode dial to K. Choose a Shooting mode. z After pressing the m button, press the op buttons or turn the  dial to choose , - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 67
on sandy beaches where the reflected sunlight is strong. S Shoot underwater (Underwater) z Lets you take natural-colored shots of aquatic life and underwater scenery when used with a waterproof case (sold separately) (p. 39). O Take shots of foliage (Foliage) z Lets you shoot trees and leaves, such - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 68
• In or S mode, images may appear coarse because the ISO speed (p. 85) is increased to match the shooting conditions. • If camera shake is too strong while shooting in mode, the camera may not be able to combine images or you may not obtain the expected result depending on shooting conditions. • In - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 69
, then press the m button again. z Press the op buttons or turn the  dial to choose a Shooting mode, then press the m button. Shoot. Shoot images with vivid colors (Super Vivid) z Lets you take shots with vivid, intense colors. Take posterized shots (Poster Effect) z Lets you take shots that look - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 70
Effect) Lets you shoot with the distorting effect of a fish-eye lens. Choose . z Follow Steps 1 - 2 on p. 69 to choose . Choose an effect level. z Press the l button. X [Effect Level] will appear on the screen. z Press the qr buttons or turn the  dial to choose an effect level, then press the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 71
that it looks like an image shot with a toy camera. Choose . z Follow Steps 1 - 2 on p. 69 to choose . Choose a color tone. z Press the l button. z [Color Tone] will appear on the screen. z Press the qr buttons or turn the  dial to choose a color tone, then press the l button. X You can check the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 72
69 to choose . Choose a color tone. z Press the l button. z [Color Tone] will appear on the screen. z Press the qr buttons or turn the  dial to choose a color tone, then press the l button. X You can check the color tone on the screen. Shoot. B/W Sepia Blue Shoots in black and white. Shoots with - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 73
buttons or turn the  dial to change the range of colors to be retained. z Choose a negative value to limit the range of colors. Choose a positive value to extend the range of colors to similar colors. z Press the l button to complete the setting and restore the shooting screen. Using the flash may - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 74
buttons or turn the  dial to adjust the range of colors to be changed. z Choose a negative value to limit the range of colors. Choose a positive value to extend the range of colors to similar colors. z Press the l button to complete the setting and restore the shooting screen. • Using the flash may - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 75
shutter button, when it detects a smile. Choose . z Follow Steps 1 - 2 on p. 66 to choose , then press the l button. z Press the qr buttons or turn the  dial to choose , then press the l button. X The camera will enter shooting stand-by, and [Smile Detection on] will appear on the screen. Point the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 76
at a person and press the shutter button fully. The camera will shoot approximately two seconds after it detects a wink. Choose . z Follow Steps 1 - 2 on p. 66 to choose , then press the l button. z Press the qr buttons or turn the  dial to choose , then press the l button. Compose the shot and - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 77
on p. 66 to choose , then press the l button. z Press the qr buttons or turn the  dial to choose , then press the l button. Compose the shot and press the shutter the camera. X When the camera detects a new face, the lamp and self-timer sound will speed up (the lamp remains lit when the flash will - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 78
if your face is not detected after joining the subjects, the shutter will release approximately 15 seconds later. Capturing the Best Facial Expressions (Best Image Selection) The camera takes 5 continuous shots, then detects various aspects of the shot such as facial expressions, and saves only one - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 79
is pressed fully and held. Choose . z Follow Steps 1 - 2 on p. 66 to choose . Shoot. X As long as you hold the shutter button down, the camera will shoot successive images. • The recording pixel setting will be fixed at (1984 x 1488 pixels). • The focus, brightness and white balance will be set - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 80
the same procedures. Finish shooting. z Press the m button. Merge the images on a computer. z For details on how to merge the images, refer to the Software Guide. This function is not available when a TV is used as a display (p. 101). 80 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 81
in modes other than G mode, check if the function is available in those modes (pp. 188 - 195). • "Correcting the White Balance" (p. 84) assumes that the camera is in S mode. 81 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 82
maximum telephoto (i). Choose h. z After pressing the r button, press the qr buttons or turn the  dial to choose h, then press the m button. X Once set, h will appear on the screen. What if the setting screen does not appear even when you press r? The flash is lowered. Raise the flash manually. 82 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 83
camera in 1/3-stop increments in the range of -2 to +2. Enter Exposure Compensation mode. z Press the o button. Adjust the brightness. z While watching the screen, turn balance, and tones down blues for taking pictures with natural colors underwater. Custom For manually setting a custom white - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 84
with a plain, white colored subject, then press the l button. X The tint on the screen will change when white balance data is set. If you change camera settings after recording white balance data, the tone may not turn out properly. Correcting the White Balance You can manually adjust the white - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 85
for blue and A for amber. • You can also manually correct op buttons or turn the  dial to choose , then press the m button again. Choose an option. z Press the op buttons or turn the  dial the flash reach greater distances to the subject. The images, however, will appear coarse. When the camera is - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 86
turn the  dial to choose an option, then press the m button. X The option you set will appear on the screen. The same aspect ratio as the screen of this camera ratio. The digital zoom (p. 55) and digital teleconverter (p. 56) are not available in aspect ratios other than since [Digital Zoom] is - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 87
increases in mode (p. 66). • Depending on the shooting conditions and the camera settings, the camera may stop shooting momentarily, or the shooting speed may slow down. • As the number of images increases, the shooting speed may slow down. • If the flash fires, the shooting speed may slow down. 87 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 88
, for example to sepia or black and white, when shooting. My Colors Off Vivid Neutral Sepia B/W Positive Film Lighter Skin Tone Darker Skin Tone Vivid Blue Vivid Green Vivid Red Custom Color Choose My Colors. z After pressing the m button, press the op buttons or turn the  dial to choose , then - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 89
Color The contrast, sharpness, color saturation, red, green, blue, and skin tones in an image can be chosen and set at 5 different levels. z Follow Step 2 on p. 88 to choose , then press the l button. z Press the op buttons to choose an option, then press the qr buttons or turn the camera will - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 90
[Small]. • The AF frame is set to [Normal] when using the digital zoom (p. 55), digital teleconverter (p. 56), or manual focus (p. 96). If the camera cannot focus when you press the shutter button halfway, the AF frame will turn yellow and will appear. Changing the Composition with the Focus Lock - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 91
are far away or extremely close - Subjects that are dark or light - Faces turned to the side or at an angle, or faces with a portion hidden • The camera may mistakenly identify non-human subjects as a face. • If the camera cannot focus when you press the shutter button halfway, the AF frame will not - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 92
on the screen. z To cancel tracking, press the q button again. Shoot. z Press the shutter button halfway. will change into a blue which will follow the subject while the camera continues to adjust the focus and exposure (Servo AF) (p. 95). z Press the shutter button fully to shoot. X Even after - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 93
on close subjects. The edges of the image may darken if the flash fires. How can I take better close-ups? Try attaching the camera to a tripod and shooting in Î to prevent the camera from moving and blurring the image (p. 59). e will turn gray in the area that displays in the yellow bar underneath - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 94
MF indicator appear on the screen. z After you release your finger from the shutter button, press the q button again, then press the qr buttons or turn the  dial to choose . The focus will unlock. Compose the scene and shoot. Magnifying the Focal Point If you press the shutter button halfway, the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 95
if the camera cannot focus. The magnified display will not appear when using the digital zoom (p. 55), digital tele-converter camera may not be able to focus in some conditions. • In low light conditions, AF frames may not turn blue even after pressing the shutter button halfway. In this case - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 96
display for the MF indicator. While looking at the magnified area, turn the  dial to find an approximate focus. MF indicator Fine tuning cancel manual focus mode first. • In order to focus accurately, try attaching the camera to a tripod. • When using the digital zoom (p. 55), digital tele- - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 97
the op buttons or turn the  dial to choose , then press the m button again. Choose an option. z Press the op buttons or turn the  dial to . AE stands for "Auto Exposure". Lock the exposure. z Point the camera toward the subject and press the o button while pressing the shutter button halfway - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 98
with the AE lock (p. 97), you can lock the exposure for shooting with the flash. FE stands for "Flash Exposure". Make sure the flash is raised, then choose h (p. 82). Lock the flash exposure. z Point the camera toward the subject and press the o button while pressing the shutter button halfway - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 99
~, then press the m button again. Choose a setting. z Press the op buttons or turn the  dial to choose the amount of flash exposure compensation, then press the m button. X Once set, ~ will appear on the screen. Safety FE The camera automatically changes the shutter speed or aperture value when the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 100
-eye that occurs in images taken with the flash. Choose [Flash Settings]. z Press the n button to choose [Flash Settings] from the 4 tab, then press the m button. Choose the setting. z Press the op buttons or turn the  dial to choose [Red-Eye Corr.], then press the qr buttons to choose [On]. X Once - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 101
. For example, when red make-up has been used around eyes. • You can also correct recorded images (p. 150). • If you press the r button then immediately press the n button when the flash is raised, the screen in Step 2 will appear. Checking for Shut Eyes When the camera detects the possibility that - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 102
Using the GPS Function SX230 HS This function uses signals received from multiple GPS satellites to record location information ( and movies. Additionally, this function can be used to automatically update the camera's clock. Before using the GPS function, make sure to correctly set the date/time and - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 103
buttons or turn the  dial to choose [GPS], then press the qr buttons to choose [On]. z When you press the n button, a message about the GPS function GPS reception status displayed on the screen. Reception Status Display (Displayed) (Flashing) (Displayed) GPS satellite signal received. The camera - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 104
Camera's Location Information (Logger Function) When the camera is turned off, it will continue to receive a signal from GPS battery power even when the camera is off, the battery level may be lower than expected when using the camera. Charge the battery as necessary, or keep a charged spare battery - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 105
want to use the logger function, set it to [Off]. If [GPS Logger] is set to [On], battery power will be consumed even when the camera is turned off. If the camera is in an environment where a GPS signal cannot be received (indoors, etc.), the battery may be depleted in half a day even if you do not - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 106
, unplug the cable from the camera, then turn the camera on and back off again. Automatically Updating the Date and Time The date and time for the set time zones (pp. 19, 169) will be automatically updated when the camera receives a GPS satellite signal. Set [GPS] to [On]. z Follow Steps 1 and - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 107
6 Getting More Out of Your Camera This chapter explains how to shoot in M, B and D modes. • This chapter assumes that the camera has been set to the corresponding mode. 107 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 108
camera will set the appropriate aperture value for the shutter speed you set. M stands for "Time value". Set the mode dial to M. Adjust the setting. z Turn second. • The fastest shutter speed when using the flash is 1/2000 second. The camera automatically resets the shutter speed to 1/2000 second if - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 109
camera will set the appropriate shutter speed for the aperture value you set. B stands for "Aperture value", which refers to the size of the aperture opening inside the lens. Set the mode dial to B. Adjust the setting. z Turn be obtained. Safety Shift is disabled when the flash is enabled. 109 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 110
Manual". Set the mode dial to D. Aperture Value Shutter Speed Standard Exposure Level Exposure Level Choose a setting. z Press the o button to choose the shutter speed or aperture value. z Turn set, the screen brightness may change. If the flash is raised and set to h, the screen brightness will - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 111
or turn the  dial to choose ~, then press the m button. Complete the setting. z Press the op buttons or turn the  dial to choose the flash output, set the flash output if you press the n button to choose [Flash Settings] from the 4 tab, then set [Flash Mode] to [Manual]. • With the flash raised, - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 112
112 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 113
7 Using Various Functions for Shooting Movies This chapter serves as a more advanced version of the "Shooting Movies" and "Viewing Movies" sections in Chapter 1, and explains how to use various functions for shooting and viewing movies. • This chapter assumes that you have set the mode dial to E. - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 114
, press the op buttons or turn the  dial to choose E, then press the m button again. z Press the op buttons or turn the  dial to choose a If you are using an earlier version of the software, download the latest version from the Canon home page. You can check the version of the included software - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 115
Movies Just as with still images, you can let the camera select the best settings for the scene or add various effects while shooting movies. I Portrait J Landscape Miniature Effect Monochrome Super Vivid Poster Effect T Color Accent Choose a Shooting mode. z Follow Step 1 on p. 65, Steps 1 - 2 on - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 116
turn the  dial to choose , then press the m button again. Choose an option. z Press the op buttons or turn . for iFrame movies (p. 114). • Based on Canon's testing standards. • Recording will automatically stop when black bars appear on the sides of the screen. These areas cannot be recorded. 116 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 117
steps for "Changing the Movie Mode" on p. 114 to choose . X Black bars will appear on the left and right sides of the screen. These areas , press the op buttons or turn the  dial to choose , then press the m button again. z Press the op buttons or turn the  dial to choose an Guide for details. 117 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 118
the frame size, and press the op buttons to change the frame position. Choose a playback speed. z Press the n button. z Press the qr buttons or turn the  dial to choose a playback speed. z Press the n button to complete the setting and restore the shooting screen. Shoot. z Press the movie button - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 119
the frame position when it is displayed vertically. • Holding the camera vertically will change the orientation of the frame. • Since you button again to release the lock. Change the exposure. z While watching the screen, turn the  dial to adjust the exposure. Shoot. z Press the movie button. z - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 120
Adjusting the White Balance (p. 83) • Changing the Tone of an Image (My Colors) (p. 88) • Shooting Using a TV as the Display (p. 101) • Shooting with the AF Lock (p. 94) • Shooting in Manual Focus Mode (p. 96) • Turning Off the AF Assist Beam (p. 171) • Displaying Grid Lines (p. 173) • Changing the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 121
and the movie editing bar will appear. Set the editing range. z Press the op buttons and choose or . z If you press the qr buttons or turn the  dial to move , will appear at points where the movie can be edited. If you choose , you can trim the beginning of the movie - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 122
op buttons to choose , then press the m button. z Press the opqr buttons or turn the  dial to choose [New File], then press the m button. X The the memory card, only [Overwrite] can be chosen. • If the battery is depleted partway through saving, the edited movie clips may not be saved. • - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 123
Playback and Editing Functions This chapter explains various ways to play back and edit images. • Press the 1 button to enter Playback mode before operating the camera. • It may not be possible to play back or edit images that have been edited on a computer, have had their file names changed, or - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 124
You can also jump by the shooting date (Scroll Display). Choose an image. z If you set the camera to single image playback and turn the  dial quickly, the images will display as shown on the left. Turn the  dial to choose an image. z Press the m button to restore single image playback. z Press the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 125
. Choose . z After pressing the m button, press the op buttons to choose , then press the m button again. Choose a movie date. z Press the op buttons or turn the  dial. Play the movie. z Press the m button. X The movie will play. Viewing Images in Filtered Playback When there are many images on the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 126
Viewing Slideshows z If you press the qr buttons or turn the  dial, only the chosen target images will display. z If you choose in Step for approximately 3 seconds. Choose .. z After pressing the m button, press the op buttons or turn the  dial to choose ., then press the m button again. 126 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 127
the n button to stop the slideshow. • If you press the qr buttons or turn the  dial during playback, the image will switch. If you keep the qr buttons forward through images. • The power saving function (p. 52) does not work during slideshows. Changing Settings You can set a slideshow to repeat, or - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 128
displayed area. z Move the zoom lever toward g to zoom out, or continue to hold it to return to single image playback. z If you turn the  dial, you can switch images while zoomed. • In magnified display, pressing the n button restores single image playback. • Movies cannot be magnified. Viewing - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 129
the  dial, only the images in the group will be displayed. z After pressing the m button, press the op buttons or turn the  dial to choose , then press the m button again to cancel group playback. Group playback In group playback (Step 3 above), you can use the FUNC. - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 130
camera will select four more images letting you enjoy playing back images in an unexpected order. This will work best if you take many shots of various scenes. Choose . z After pressing the m button, press the op buttons or turn still images shot with this camera will play back in Smart - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 131
Checking the Focus You can magnify the area of a recorded image that was inside the AF frame to check the focus. Press the l button to switch to the focus check display (p. 44). X A white frame will appear where the AF frame was when the focus was set. X A gray frame will appear on a face detected - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 132
the cable plug fully into the video input terminals as shown in the illustration. Red White Turn on the TV and switch it to the input the cable is connected to. Turn on the camera. z Press the 1 button to turn on the camera. X The image will appear on the TV (nothing will appear on the screen - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 133
an HDMI CEC compatible TV, you can use the TV's remote control to operate the camera and play back images or view slideshows. You may need to make settings on some TVs. For details, refer to the user guide supplied with the TV. Choose [Ctrl via HDMI]. z Press the n button to choose [Ctrl - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 134
to the TV. z Follow Steps 1 - 2 on p. 133 to connect the camera to the TV. Display images. z Turn on the TV and press the camera's 1 button. X The image will appear on the TV (nothing will appear on the screen of the camera). Use the TV's remote control. z Press the remote control's qr buttons to - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 135
Images You can protect important images so that they cannot be accidentally erased with the camera (pp. 28, 138). Using the Menu Protect the image. z After pressing the m button, press the op buttons or turn the  dial to choose :, then press the m button again. X [Protected] will appear on the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 136
the image. z If you press the n button, a confirmation screen will appear. z Press the qr buttons or turn the  dial to choose [OK], then press the m button. If you switch to Shooting mode or turn off the power before performing the operations in Step 3, images will not be protected. Select Range - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 137
Press the p button to choose [Protect], then press the m button. Choose images with the  dial You can also choose the first or last image by turning the  dial when the upper screen in Steps 2 and 3 is displayed. Choose All Images Choose [All Images]. z Follow Step 2 on p. 135 to choose [All Images - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 138
[Erase]. z Press the n button to choose [Erase] from the 1 tab, then press the m button. Choose a selection method. z Press the op buttons or turn the  dial to choose a selection method, then press the m button. z Press the n button to restore the menu screen. Choosing Images Individually Choose - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 139
m button. Choose All Images Choose [All Images]. z Follow Step 2 on p. 138 to choose [All Images], then press the m button. Erase. z Press the qr buttons or turn the  dial to choose [OK], then press the m button. 139 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 140
just those images for viewing, protecting or erasing (p. 125). Using the Menu Make the setting. z After pressing the m button, press the op buttons or turn the  dial to choose , then press the m button again. X [Tagged as Favorite] will appear on the screen. z To unlock an image, follow the step - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 141
, or in A or 9 modes, or images shot in J, O or . : Images shot in t, w, S, P. Choose ;. z After pressing the m button, press the op buttons or turn the  dial to choose ;, then press the m button again. Choose a category. z Press the op buttons, to choose a category, then press the m button. X will - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 142
Choose [My Category]. z Press the n button to choose [My Category] from the 1 tab, then press the m button. Choose a selection method. z Press the op buttons or turn the  dial to choose a selection method, then press the m button. z Press the n button to restore the menu screen. 142 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 143
Images Individually Choose [Select]. z Follow Step 2 on p. 142 to choose [Select], then press the m button. Choose an image. z Press the qr buttons or turn the  dial to choose an image. Choose a category. z Press the op buttons to choose a category, then press the m button. X will appear on the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 144
. z Follow Steps 2 and 3 on p. 136 to choose images. Choose a category. z Press the p button to choose an item, then press the qr buttons or turn the  dial to choose a category. Complete the setting. z Press the p button to choose [Select], then press the m button. If you choose [Deselect] in - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 145
the setting. Choose [Rotate]. z Press the n button to choose [Rotate] from the 1 tab, then press the m button. Rotate the image. z Press the qr buttons or turn the  dial to choose an image. z The image will rotate 90° with each press of the m button. z Press the n button to restore the menu screen - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 146
as a new file. Display the new image. z When you press the n button, [Display new image?] will appear on the screen. z Press the qr buttons or turn the  dial to choose [Yes], then press the m button. X The saved image will be displayed. • You cannot resize an image to a larger size. • Images saved - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 147
] from the 1 tab, then press the m button. Trimming Area Trimming Area Display Recorded pixels after trimming Choose an image. z Press the qr buttons or turn the  dial to choose an image, then press the m button. Adjust the trimming area. X A frame will appear around the portion of the image to - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 148
as a separate image. Refer to p. 88 for details on each menu item. Choose [My Colors]. z Press the n button to choose [My Colors] from the 1 tab, then press the m button. Choose an image. z Press the qr buttons or turn the  dial to choose an image, then press the m button. Choose an option. z Press - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 149
. Also, when the overall image is lacking in contrast, the camera will automatically correct the image for a sharper impression. You can z Press the qr buttons or turn the  dial to choose an image, then press the m button. Choose an option. z Press the qr buttons or turn the  dial to choose an - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 150
] from the 1 tab, then press the m button. Choose an image. z Press the qr buttons or turn the  dial to choose an image. Correct the image. z Press the m button. X Red-eye detected by the camera will be corrected and a frame will appear around the corrected portion. z You can magnify or reduce the - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 151
compliant printer (sold separately). Canon-Brand PictBridge Compliant Printers • This chapter uses Canon-brand SELPHY CP series printers in the explanations. The displayed screens and available functions will differ depending on the printer. Please also refer to the Printer User Guide. 151 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 152
shown. z Insert the cable's large plug into the printer. For connection details, refer to the user guide provided with the printer. Turn on the printer. Turn on the camera. z Press the 1 button to turn on the camera. Choose an image. z Press the qr buttons or turn the  dial to choose an image. 152 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 153
print additional images, repeat Steps 5 and 6 after printing has completed. z After printing has completed, turn off the camera and printer, and unplug the interface cable. • Refer to p. 40 for Canon-brand Pictbridge compliant printers (sold separately). • Index printing is not available on certain - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 154
the camera to the printer. z Follow Steps 1 - 6 on p. 152 to display the screen on the left. Choose a menu option. z Press the op buttons or turn the settings. Red-Eye 1 Corrects red-eye. Red-Eye 2* Uses [NR], [Face image. ] and [Red-Eye 1] to correct the Vivid* Greens in trees, and blues in - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 155
the m button. X A frame will appear around the portion of the image to be trimmed. Choose the trimming area. z If you move the zoom lever or turn the  dial, you can change the frame size. z Press the opqr buttons to change the frame position. z Press the l button to rotate the frame. z Press - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 156
for Printing Choose [Paper Settings]. z Follow Steps 1 - 2 on p. 154 to choose [Paper Settings], then press the m button. Choose a paper size. z Press the op buttons or turn the  dial to choose an option, then press the m button. Choose the paper type. z Press the op buttons or - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 157
sheet. Prints ID photos. Only images with the same resolution as the camera's L (Large) recording pixel setting and a 4:3 aspect ratio can be . Choose the length of the long side and short side. z Press the op buttons or turn the  dial to choose an item. z Press the qr buttons to choose the length, - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 158
Connect the camera to the printer. z Follow Steps 1 - 6 on p. 152 to display the screen on the left. Choose a printing method. z Press the op buttons or turn the  dial [ID Photo] and [Sequence] cannot be chosen on Canon brand PictBridge compliant printers from CP720/CP730 and earlier models. 158 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 159
(p. 162) or processed at a photo developer service. These selection methods comply with the DPOF (Digital Print Order Format) standards. Adding Images to op buttons to choose the number of prints, then press the qr buttons or turn the  dial to choose [Add] and press the m button. Print Settings - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 160
Press the op buttons or turn the  dial to choose settings after printing. - • Some printers or photo developer services may not be able to reflect all of the settings with print settings set by a different camera. These settings will be overwritten with those set by your camera. • If [Date] is set - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 161
Printing (DPOF) Choose an image. z Press the qr buttons or turn the  dial to choose an image, then press the m button again to deselect the image. will disappear. Set the number of prints. z Press the op buttons or turn the  dial to set the number of prints (maximum 99). z Follow Steps 2 and 3 to - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 162
the m button. All selections will be cleared. z Press the qr buttons or turn the  dial to choose [OK], then press the m button. Printing chosen images - 162), the screen on the left will appear when you connect the camera to a PictBridge compliant printer. Press the op buttons to choose [Print now - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 163
10 Customizing Camera Settings You can customize various settings to suit your shooting preferences. The first part of this chapter explains convenient and commonly used functions. The latter part explains how to change shooting and playback settings to suit your purposes. 163 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 164
and commonly used functions from the 3 tab (p. 47). Changing Sounds You can change each of the camera's operation sounds. z Choose [Sound Options], then press the m button. z Press the op buttons or turn the  dial to choose a menu item. z Press the qr buttons to choose an option. 1 Preset - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 165
Formatting Perform low level formatting when [Memory card error] appears, the camera does not operate properly, you think that the [Format], then press the m button. z Press the op buttons or turn the  dial to choose [Low Level Format], then press the qr buttons to display used without problem. 165 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 166
Settings Changing the Start-up Screen You can change the start-up screen that appears when you turn on the camera. z Choose [Start-up Image], then press the m button. z Press the qr buttons or turn the  dial to choose an option. No start-up image 1 Preset images (cannot be modified) Preset - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 167
with the included software The dedicated operation sounds and start-up images on the included software can be registered to the camera. Refer to the Software Guide for details. Changing the File Number Assignment Images you shoot are automatically assigned file numbers in the order they were taken - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 168
Changing Camera Settings Creating Folders by Shooting Date Images are saved into Choose [Lens Retract], then press the qr buttons to choose [0 sec.]. Turning Off the Power Saving Function You can set the power saving function (p. 52) to [Off]. Setting it to [On] is recommended to save battery power. - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 169
off automatically (p. 52). This also works when [Auto Power Down] is set to [Off]. z Choose [Power Saving], then press the m button. z Press the op buttons or turn the  dial to choose [Display Off], then press the qr buttons to choose a time. z In order to save battery power, you should choose less - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 170
. Changing the Displayed Units You can change the units that display in the MF indicator (p. 96), zoom bar (p. 24), and the altitude recorded with the GPS function (p. 45) SX230 HS , from m/cm to ft/in. z Choose [Units], then press the qr buttons to choose [ft/in]. 170 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 171
until you press the shutter button halfway, it allows you to shoot without missing photo opportunities. The camera does not focus Off continuously, thereby conserving battery power. Turning Off the AF Assist Beam The lamp will automatically light to assist focusing in low light conditions when - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 172
[Flash Settings], then press the m button. z Press the op buttons or turn the  dial to choose [Red-Eye Lamp], then press the qr buttons to choose [Off]. Changing the Image Display Time Right After Shooting You can change the length of time the images display right after shooting. z Choose [Review - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 173
horizontally. Off - • If camera shake is too strong, attach the camera to a tripod. You should also set the IS Mode to [Off] when the camera is attached to a tripod. • When using [Panning], hold the camera horizontally to shoot. Image stabilization does not work when the camera is held vertically - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 174
the settings in the 1 tab by pressing the 1 button (p. 47). Turning Off the Auto Rotate Function When you play back images on the camera, images shot in vertical orientation automatically rotate and display vertically. You can turn off this function. z Choose [Auto Rotate], then press the qr buttons - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 175
11 Useful Information This chapter introduces how to use the AC adapter kit and Eye-Fi card (both sold separately), troubleshooting tips, and contains lists of functions and items that appear on the screen. 175 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 176
Using Household Power If you use AC Adapter Kit ACK-DC30 (sold separately), you can use the camera without worrying about how much charge is left in the battery. Turn off the camera. Terminals Insert the coupler. z Follow Step 2 on p. 17 to open the cover, then insert the coupler as shown until - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 177
(simple information display). (Gray) Not connected (Flashing white) Connecting (White) Transfer standby (Animated) Transferring Interrupted Error retrieving Eye-Fi card info (Turn the camera off and on again. If this continues to appear, there may be a problem with the card.) will appear on - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 178
saving function does not work while transferring images from the 3 tab, then press the m button. z Press the op buttons or turn the  dial to choose [Eye-Fi trans.], then press the qr buttons to appear when an Eye-Fi card is not inserted in the camera, or when an Eye-Fi card's write-protect tab is - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 179
Troubleshooting If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk as listed on the included customer support list. Power You pressed the power button, but nothing happened. • Confirm - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 180
appear rough or grainy (pp. 66, 68). Eyes appear red (p. 100). • Set the [Red-Eye Lamp] to [On] (p. 172). When shooting with the flash, the lamp (on the front of the camera) lights (p. 42), and for approximately 1 second while the camera is reducing red-eye, it is not possible to shoot. It is more - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 181
Troubleshooting be able to play back images or movies. Refer to the Software Guide for information regarding folder structure or file names. Playback stops, or images to a computer. It may be possible to solve the problem when the camera is connected to a computer via cable by reducing the transfer - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 182
error (p. 165) • If the same message appears even when a formatted memory card is installed in the correct direction, contact a Canon Customer Support Help Desk (p. 17). Insufficient space on card • There is not enough free have been taken with a different camera may not display. Cannot magnify!/ - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 183
My Category (p. 141) or Print Settings (p. 159). Communication error • Images could not be transferred to the computer or error message continues to appear, contact a Canon Customer Support Help Desk as there may be a problem with the lens. A camera error was detected (Error number) • If an error - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 184
) Eye-Fi Connection Status (p. 177) Battery Charge Indicator (p. 15) Camera Orientation* White Balance (p. 83) My Colors (p. 88) Drive Mode (p. 87) Self-Timer (p. 58) Camera Shake Warning (p. 26) Metering Method (p. 97) GPS Reception Status (p. 103) SX230 HS Compression (p. 60), Recording Pixels - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 185
the best shot. It also detects orientation during playback, so you can hold the camera Color Bright Backlit - Gray Including Blue Skies Backlit - Light Blue Sunsets - - Orange Spotlights Dark Dark Blue When Using * - Tripod * - * Appears when the scene is dark and the camera - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 186
GPS Information Display) (p. 45) SX230 HS Battery Flash Exposure Compensation (p. 99) Focusing Range (pp. 93, 96) File Size (pp. 61, 116) Still Images: Recording Pixels (p. 60) Movies: Movie Length (p. 116) Protect (p. 135) Favorites (p. 140) My Colors (pp. 88, 148) Shooting Date and Time (p. 19) Red - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 187
Displayed on the Screen Summary of Movie Control Panel in "Viewing Movies" (p. 32) Exit Playback Slow motion playback (You can use the qr buttons or turn the  dial to adjust the speed. Sound will not play back.) Skip backward* (Continues to skip backward if the m button is held.) Previous frame - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 188
Available in Each Shooting Mode Shooting Modes D BM G A9 IJ Function Exposure Compensation (p. 83) Self-Timer (p. 58) Self-Timer Settings (p. 59) ÒÎ$ Delay*1 Shots*2 h Flash (pp. 54, 82, 100) ... ! Av Av/Tv Settings (p. 107) Tv Program Shift (p. 98) AE Lock/FE Lock (pp. 97, 98)*5 AE Lock - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 189
Functions Available in Each Shooting Mode K E C w S O P t x v T Y E *5 FE Lock not available when set to !. { Selectable, or set automatically. - Not selectable. 189 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 190
(p. 99) Flash Output Settings (p. 111) Drive Mode (p. 87) Still Image Aspect Ratio (p. 86) W *4 Recording pixels (p. 60) Compression Ratio (p. 60) Movie Quality (p. 116) *1 White balance is not selectable. *2 Contrast, sharpness, color saturation, red, green, blue, and skin - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 191
Functions Available in Each Shooting Mode FUNC. Menu K C w S O P t x v E T Y E 5 *5 Only and are available. { Selectable, or set automatically. - Not selectable. 191 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 192
) Off Digital Tele-converter (1.5x/2.0x On AF-Point Zoom (p. 94) Off Servo AF (p. 95) On Off*4 On Continuous AF (p. 171) Off On AF-assist Beam (p. 171) Off { { { { { *5 On MF-Point Zoom (p. 96) Off On Safety MF (p. 96) Off Flash Mode Auto Manual Flash Exp - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 193
Menus K C w S O P t x v E T Y E *5 [On] when the flash is set to . { Selectable, or set automatically. - Not selectable. 193 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 194
Menus Function Review (p. 172) Review Info (p. 172) Blink Detection (p. 101) Grid Lines (p. 173) IS Mode (p. 173) Date Stamp (p. 57) Shooting Modes D BM G A9 IJ Off 2 sec. 3 - 10 sec./Hold Off Detailed/Focus Check On Off On Off Off Continuous Shoot Only/Panning Off Date/Date & Time 194 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 195
Menus K E C w S O P t x v T Y E { Selectable, or set automatically. - Not selectable. 195 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 196
Time Zone Date/Time Time Update SX230 HS GPS Settings SX230 HS Units Video System Ctrl via HDMI Eye-Fi Settings Language Reset All * Default setting Content Ref. Page On/Off* p. 48 Set all operation sounds (5 levels). p. 49 Set the sounds for each camera operation. p. 164 On*/Off p. 164 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 197
Erase Protect Rotate Favorites My Category i-Contrast Red-Eye Correction Trimming Resize My Colors Scroll Display Group Images Auto Rotate Resume or clears settings for printing displayed image ([Print] appears when the camera is connected to the printer). p. 159 Protects/unlocks displayed image. - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 198
Macro 5 - 50 cm (W) (2.0 in. - 1.6 ft. (W)) Image Stabilizer (IS) System .......... Lens-shift type Imaging Processor DIGIC 4 LCD Monitor Type TFT color speed range) Aperture Type Iris f/number f/3.1 / f/8.0 (W), f/5.9 / f/8.0 (T) Flash Modes Auto, on, Slow Synchro, Off Range 75 cm - 3.5 m (W), - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 199
HC MMCplus card File Format Design rule for Camera File system, DPOF (Version 1.1) compliant Data Type Still Images Exif 2.3 (JPEG) Movies MOV (Image data: H.264; Audio data: Linear PCM (stereo)) GPS Log File NMEA 0183 message format compliant SX230 HS Number of Recording Pixels Still Images 16 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 200
5L AC Adapter Kit ACK-DC30 Dimensions (CIPA compliant 105.7 x 61.6 x 33.2 mm (4.16 x 2.42 x 1.31 in.) SX230 HS 105.7 x 59.3 x 33.2 mm (4.16 x 2.33 x 1.31 in.) SX2320 HS Weight (CIPA compliant Approx. 223 g (7.87 oz.) (Including the battery and memory card) SX230 HS Approx. 195 g (6.88 oz.) (camera - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 201
Voltage 3.7 V DC Capacity 1120 mAh Battery Life (Charge Cycles Approx. 300 times Operating temperature 0 - 40 °C (32 - 104 °F) Dimensions 32.0 x 44.9 x 7.9 mm (1.26 x 1.77 x 0.31 in.) Weight Approx. 25 g (0.88 oz.) Battery Charger CB-2LX/CB-2LXE Rated input 100 - 240 V AC (50/60 Hz), 0.085 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 202
67 Best Image Selection (Shooting Mode)..... 78 Black and White Images 88 Blink Detection 101 C Camera Default Settings 51 Holding the Camera 13 Camera Shake 173 Center (AF Frame Mode 90 Clock Functions 52 Color Accent (Shooting Mode 73 Color Swap (Shooting Mode 74 Components Guide 42 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 203
AF 95 Focus Check 131 Focus Lock 90 Focusing Range Macro 93 Manual Focus 96 Foliage (Shooting Mode 67 Format J Memory Cards, Formatting Formatting (Memory Card 22, 165 Frame 117 FUNC. Menu Basic Operations 46 List 190, 197 G GPS SX230 HS 45, 102 Grid Lines 173, 185 H Handheld NightScene - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 204
Pixels (Image Size 60 Red-Eye Correction 100, 150 67 Software DIGITAL CAMERA Solution Disk ......... 2 Installation 34 Software Guide 2 Transferring Camera Effect (Shooting Mode)......... 71 Tracking AF 92 Tracking AF (AF Frame Mode 26 Travel Abroad 15, 39, 169 Trimming 147 Troubleshooting - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 205
lens. For stubborn dirt contact a Canon Customer Support Help Desk as listed on the customer support leaflet supplied with your camera. • When you move the camera has formed on the camera, stop using it immediately, as continued use may damage the camera. Remove the battery and memory card, and - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 206
MEMO 206 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 207
MEMO 207 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 208
MEMO 208 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 209
MEMO 209 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 210
MEMO 210 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 211
MEMO 211 - Canon PowerShot SX230 HS | PowerShot SX230 HS / SX220 HS Camera User Guide - Page 212
or storing in a retrieval system any part of this guide without the permission of Canon is prohibited. • Canon reserves the right to change the contents of this guide at any time without prior notice. • Illustrations and screenshots in this guide may differ slightly from the actual equipment. • The
Camera User Guide
ENGLISH
•
Make sure you read this guide, including the “Safety
Precautions” section, before using the camera.
•
Reading this guide will help you learn to use the camera
properly.
•
Store this guide safely so that you can use it in the future.