Compaq Presario SR1000 Presario Desktop PCs - Getting Started Guide - Page 40
Setting up 6-connector sound
View all Compaq Presario SR1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
NOTE: To test the speakers (multichannel speakers only), click the Test button. The WinDVD control panel shows the speaker number being used. Click Stop. 6 Click OK. NOTE: If you want to play a stereo DVD, change the audio properties of WinDVD to match the recorded DVD audio output. Setting up 6-connector sound PC models that include six sound connectors (select models only) on the back of the PC, support up to eight channels of sound (7.1 speaker output) and use the Sound Effect Manager to configure the software settings. Identifying the six audio connectors (6-connector) The PC supports a maximum of eight speakers in a multichannel speaker system by using four of the six audio connectors on the back of the PC. This PC also has digital audio out and digital audio in connectors for digital sound devices such as a DVD recorder or a digital stereo receiver/amplifier. The four connectors for the 6-connector multichannel speaker system are on the back of the PC: • A Side speaker port (side) • B Rear speaker port (rear) • C Center speaker/subwoofer port (c/sub) • E Audio line out (out) for front speakers The previous figure shows the six audio connectors arranged on the back of the PC: the four connectors used for eight-channel audio and the connectors for the microphone (D, mic) and the audio line in (F, in). 34 Getting Started Guide