D-Link DCS-6620 Product Manual - Page 58
Configuration > Tools > Applications, Weekly schedule, Event operation - reset
UPC - 790069277078
View all D-Link DCS-6620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
DCS-6620 User's Manual Using the DCS-6620 with an Internet Browser Configuration > Tools > Applications (continued) Weekly schedule Sunday through Saturday: Snapshots begin at: Snapshots stop at: Select the weekdays that should perform the following operations: Set the time to start operations. Setting the begin time the same as the stop time will force the operations to run continuously. Sets the time to stop the operations. All of the time except for If you do not wish to set a schedule, this box must be the above schedule: checked. Event operation Delay second(s) before detecting next event: Sets the time delay before restarting to check the trigger condition when the current condition is triggered. Take snapshots at second(s) after event: Trigger condition: Reset output: After a snapshot is taken because of a trigger, another snapshot will be taken after the configured time in seconds. There are 4 conditions related to the digital input and three windows for motion detection. There can be multiple selections. Select the appropriate digital input condition according to the characteristics of the external device. "High", "low" indicate external voltage input for level trigger, while "rising", "falling" is for edge triggers. There are three windows shown for the names you defined for motion detection. "Undefined" will show instead of the window title if motion detection is not setup yet. An active, named motion window must be checked for motion detection to be possible. Check and save this option to reset the external device at the digital output back to the original state. D-Link Systems, Inc. 58