Dell 3110cn Color Laser Printer User Guide - Page 146
IPX/SPX, IP Filter IPv4, Enable, Disable, Purpose, Values, Ethernet II, Ethernet 802.3, Ethernet SNAP
View all Dell 3110cn Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
HTTP-SSL/TLS*1 Enables the HTTP-SSL/TLS port. Enable* Disables the HTTP-SSL/TLS port. Disable *1 Only displayed when an optional multi protocol card is installed on the printer and the optional wireless printer adapter is not installed on the card. IPX/SPX Purpose: To configure the IPX/SPX settings for the wired network. The change becomes effective after the printer is turned off and then on again. Values: Auto* Automatically sets the frame type. Ethernet II Uses the Ethernet II frame type. Uses the IEEE802.3 frame type. Ethernet 802.3 Uses the IEEE802.2 frame type. Ethernet 802.2 Use the SNAP frame type. Ethernet SNAP NOTE: The IPX/SPX menu is only displayed when an optional multi protocol card is installed on the printer and the optional wireless printer adapter is not installed on the card. IP Filter (IPv4) Purpose: To specify that data received from certain IP addresses through the wired network is blocked. You can set up to 5 IP addresses. The change becomes effective after the printer is turned off and then on again. Values: