Dell 3110cn Color Laser Printer User Guide - Page 210

Disk Full 016-980 Job too Large Press PDL Request 016-720 Data Violation Press Invalid Job 016-799 Data Violation Press Ready to Print 193-700 Non-DELL Toner Installed Over Heat 042-700 Cooling down Please Wait... Ready to Print 142-700 Over Heat Turned Halfmode See "Accessing Held Jobs From the Operator Panel" RAM disk memory is full and cannot continue processing the current print job. · Press to clear the message, cancel the current print job, and conduct the next print job, if any. · Press Cancel to cancel the print job. · Press Menu to open Stored Print and delete the current job. · To avoid this error in the future, do the following: · Reduce the number of print pages such as splitting the print data. · Increase free memory space by deleting unnecessary data in the RAM disk. See "Accessing Held Jobs From the Operator Panel" Error relating to PDL emulation problems occurs. · Press to clear the message, cancel the current print job, and conduct the next print job, if any. · Press Cancel to cancel the print job. When the configuration of the printer on the printer driver does not conform to the printer you are using, this message appears. · Press Cancel to cancel the print job. · Press to clear the message, cancel the current print job, and conduct the next print job, if any. · Make sure that the printer configuration on the printer driver conforms to the printer you are using. The printer is in the custom print cartridge mode. Though some of the print cartridges reach the end of their lives, you can continue printing. Since it is abnormally hot inside the printer, printing is paused. Wait for a while with the printer on until the error disappears. Since it is abnormally hot inside the printer, the print speed decreases. Do not start another print job until the warning disappears.