Dell 3110cn Color Laser Printer User Guide - Page 147

Filter*1 No. n/Address (n is 1 to 5.) Sets the IP address for Filter n. No. n/Mask (n is 1 to 5.) Sets the mask for Filter n. Disable the IP Filter feature for Filter n. No. n/Mode (n is 1 to 5.) Off* Accepts an access from specified IP address. Accept Rejects an access from specified IP address. Reject *1 This item is only available for LPD or Port9100. Reset LAN Purpose: To initialize wired network data stored in NV (non-volatile) memory. After executing this function and rebooting the printer, all wired network settings are reset to their default values. Adobe Protocol Purpose: To specify PostScript communication protocol for each interface. You can configure the Adobe Protocol settings for the wired network. The change becomes effective after the printer is turned off and then on again. Values: Auto* Used when auto-detecting the PostScript communication protocol. Used when the communication protocol is in ASCII interface. Standard BCP Used when the communication protocol is in binary format. TBCP Used when the communication protocol supports both ASCII and binary data to switch between them according to the specified control code. Binary Used when no special processing is required for data.