Dell 3110cn Color Laser Printer User Guide - Page 383

Example To convert the program list of the file.txt file into the PostScript language program that sets the paper to the landscape orientation and prints in the 2-up mode, type as follows: % txt2ps2 -r -2 file.txt | lpr (for Linux) % txt2ps2 -r -2 file.txt | lp (for Solaris/HP-UX) To convert file.txt to the PostScript language program and output it to the file.ps file, type as follows: % txt2ps2 file.txt > file.ps % lpr file.ps (for Linux) % lp file.ps (for Solaris/HP-UX) To convert the output result of the command into the PostScript language program using txt2ps2 and print it to the printer, type as follows: % ls -alF | txt2ps2 | lpr (for Linux) % ls -alF | txt2ps2 | lp (for Solaris/HP-UX) Environmental Variable TXT2PS2OPTION Optional settings based on the environmental variable. To output in the 2-up mode, 8 points and the landscape orientation, type as follows: % setenv TXT2PS2OPTION "-2 -s8 -r" To use the same options as those of the dellpsif filter specified by printcap, type as follows: % setenv TXT2PS2OPTION "" File /usr/local/dellbin3110/.dellpsdefault3110 This is the default command option setting file for individual users. Important When the same option is specified twice, the later setting will prevail. As TXT2PS2OPTION is analyzed before the option of the command line, it is possible to temporarily modify the options already set in TXT2PS2OPTION by typing at the command line. The comment description (%%page:m n) of the page number cannot be output to the PostScript program file which is output by the default option of txt2ps2. Thus, when the output of txt2ps2 is to be taken as the output of another application (psrev of TRANSCRIPT, etc.), add the page number description by inserting the line command (-Ilines).