Dell 3110cn Color Laser Printer User Guide - Page 152
IP Filter IPv4, Reset MPC, Adobe Protocol, Ethernet II
View all Dell 3110cn Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Auto* Automatically sets the frame type. Ethernet II Uses the Ethernet II frame type. Uses the IEEE802.3 frame type. Ethernet 802.3 Uses the IEEE802.2 frame type. Ethernet 802.2 Use the SNAP frame type. Ethernet SNAP IP Filter (IPv4) Purpose: To specify that data received from certain IP addresses through the wireless network is blocked. You can set up to 5 IP addresses. The change becomes effective after the printer is turned off and then on again. Values: IP Filter*1 No. n/Address (n is 1 to 5.) Sets the IP address for Filter n. No. n/Mask (n is 1 to 5.) Sets the mask for Filter n. Disable the IP Filter feature for Filter n. No. n/Mode (n is 1 to 5.) Off* Accepts an access from specified IP address. Accept Rejects an access from specified IP address. Reject *1 This item is only available for LPD or Port9100. Reset MPC Purpose: To initialize wireless network data stored in NVRAM. Adobe Protocol