Home » Dell Manuals » Multifunction Devices » Dell 3110cn Color Laser Printer » Manual Viewer

Dell 3110cn Color Laser Printer User Guide - Page 217

Removing Print Jams From the Fuser

View all Dell 3110cn Color Laser Printer manuals

Add to My Manuals
Save this manual to your list of manuals

Page 217 highlights

CAUTION: Do not use excessive force on the tray. Doing so could damage the tray or the inside of the printer. Removing Print Jams From the Fuser NOTICE: Make sure nothing touches or scratches the surface (black-colored film) of the belt unit. Scratches, dirt, or oil from your hands on the film of the belt unit may reduce print quality. NOTICE: To protect the drums of the print cartridges against bright light, close the front cover within 5 minutes. If the front cover remains open for more than 5 minutes, print quality may deteriorate. NOTE: To resolve the error displayed on the operator panel, you must clear all print media from the print media path. 1. Turn off the printer and wait for 30 minutes. 2. Push the side button and open the front cover. 3. Lift the levers at both ends of the fuser, and remove the jammed paper. If any jammed paper cannot be found, go to the next step.

Section	Page
Dell Color Laser Printer 3110cn User's Guide	1
Finding Information	5
Dell Printer Configuration Web Tool	7
About Your Printer	54
Installing the Print Cartridges	56
Connecting Your Printer	61
Enterprise Console Management Modules	69
Installing Optional Modules	70
Print Media Guidelines	113
Loading Print Media	124
Operator Panel	134
Printer Settings	136
Understanding Printer Menus	140
Understanding Your Printer Software	183
Printing	186
Setting Up for Shared Printing	193
Understanding Fonts	197
Understanding Printer Messages	207
Clearing Jams	211
Troubleshooting	225
Printing With Web Services for Devices (WSD)	300
Maintaining Your Printer	301
Removing Options	325
Printer Specifications	336
Printing With UX Filter (UNIX/Linux)	340
Printing With CUPS (Linux)	438
Safety and Regulatory Information	444

Match case Limit results 1 per page

CAUTION:

Do not use excessive force on the tray. Doing so could damage the tray or the

inside of the printer.

Removing Print Jams From the Fuser

NOTICE:

Make sure nothing touches or scratches the surface (black-colored film) of the belt unit.

Scratches, dirt, or oil from your hands on the film of the belt unit may reduce print quality.

NOTICE:

To protect the drums of the print cartridges against bright light, close the front cover within

5 minutes. If the front cover remains open for more than 5 minutes, print quality may deteriorate.

NOTE:

To resolve the error displayed on the operator panel, you must clear all print media from the

print media path.

Turn off the printer and wait for 30 minutes.

Push the side button and open the front cover.

Lift the levers at both ends of the fuser, and remove the jammed paper. If any jammed paper cannot

be found, go to the next step.