Dell 3110cn Color Laser Printer User Guide - Page 266

a. b. Right-click Wireless Network Connection and select Properties. c. Select Wireless Network tab. d. Click Advanced. e. Do either of the following: When wireless ad-hoc mode is set to the printer: Select Computer to Computer (ad hoc) networks only and close the Advanced dialog box. When wireless infrastructure mode is set to the printer: Select Access point (Infrastructure) networks only and close the Advanced dialog box. f. Select the setting that you send to the printer in the list in Preferred Network group. g. Click Move up to move the setting to the top of the list. h. Click OK to close the Property dialog box. NOTE: When your operating system is earlier than Windows 2000, create settings according to the manual of the wireless setting tool provided by your wireless device manufacturer. For Windows Vista: a. Open Control Panel. b. Select Network and Internet. c. Select Network and Sharing Center. d. Select Connect to a network. e. Select the original setting from the network items listed in Connect to a network, and then click Connect. Scene 2. Construct new wireless network environment for both computer and printer (When wireless setting needs to be set to your computer) For DHCP network: 1. Create wireless setting of your computer following the steps below. NOTE: If your computer provides a wireless LAN adapter tool, change the wireless settings using this tool. Or you can change the wireless settings using the tool provided by the operating system. See the instructions below. For Windows XP and Windows Server 2003: a. Select Network Connections from Control Panel. b.