Dell External OEMR R410 Owners Manual - Page 102
Expansion-Card Riser, Removing an Expansion-Card Riser
View all Dell External OEMR R410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Expansion-Card Riser The system's expansion-card riser supports an x16 link Gen1 or Gen2 PCIe expansion card. (An additional slot on the riser is reserved for use by the integrated storage controller card.) Removing an Expansion-Card Riser WARNING: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before you begin this procedure, review the safety instructions that came with the system. 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 82. 3 If installed, remove the expansion card from the expansion slot, now. See "Removing an Expansion Card" on page 99. 4 If installed, remove the integrated storage controller card. See "Removing the Integrated Storage Controller Card" on page 100. 5 To remove the expansion-card riser, grasp the riser guides and lift the expansion-card riser from the chassis. See Figure 3-13. 102 Installing System Components