Dell External OEMR R410 Owners Manual - Page 98
Connect any cables to the expansion card., Close the system. See Closing the System
View all Dell External OEMR R410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
5 Install the expansion card: a Holding the card by its edges, position the card so that the card-edge connector aligns with the expansion-card connector on the expansioncard riser. b Insert the card-edge connector firmly into the expansion-card connector until the card is fully seated. c Close the expansion-card latch. See Figure 3-11. Figure 3-11. Installing or Removing an Expansion Card 3 1 2 1 expansion-card latch 3 expansion-card riser 2 expansion card 6 Connect any cables to the expansion card. 7 Close the system. See "Closing the System" on page 83. 8 Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals. 98 Installing System Components
98
Installing System Components
5
Install the expansion card:
a
Holding the card by its edges, position the card so that the card-edge
connector aligns with the expansion-card connector on the expansion-
card riser.
b
Insert the card-edge connector firmly into the expansion-card
connector until the card is fully seated.
c
Close the expansion-card latch. See Figure 3-11.
Figure 3-11.
Installing or Removing an Expansion Card
6
Connect any cables to the expansion card.
7
Close the system. See "Closing the System" on page 83.
8
Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
1
expansion-card latch
2
expansion card
3
expansion-card riser
2
1
3