Dell External OEMR R410 Owners Manual - Page 88
Installing a Hard Drive Into a Hard-Drive Carrier, When aligned correctly
View all Dell External OEMR R410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Figure 3-6. Installing a Hard Drive Into a Drive Carrier 2 3 1 4 1 drive carrier 3 hard drive 2 screws (4) 4 SAS/SATA screw hole Installing a Hard Drive Into a Hard-Drive Carrier 1 Insert the hard drive into the hard-drive carrier with the connector end of the drive at the back. See Figure 3-6. 2 Align the holes on the hard drive with the back set of holes on the hard drive carrier. When aligned correctly, the back of the hard drive will be flush with the back of the hard-drive carrier. 3 Attach the four screws to secure the hard drive to the hard-drive carrier. 88 Installing System Components
88
Installing System Components
Figure 3-6.
Installing a Hard Drive Into a Drive Carrier
Installing a Hard Drive Into a Hard-Drive Carrier
1
Insert the hard drive into the hard-drive carrier with the connector end of
the drive at the back. See Figure 3-6.
2
Align the holes on the hard drive with the back set of holes on the hard
drive carrier.
When aligned correctly, the back of the hard drive will be flush with the
back of the hard-drive carrier.
3
Attach the four screws to secure the hard drive to the hard-drive carrier.
1
drive carrier
2
screws (4)
3
hard drive
4
SAS/SATA screw hole
4
3
1
2