Dell External OEMR R410 Owners Manual - Page 30
SAS cable A, See Troubleshooting
View all Dell External OEMR R410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Table 1-2. LCD Status Messages (Optional) (continued) Code Text Causes E1714 Unknown error. The system BIOS has Review & clear determined there has SEL. been an error in the system, but is unable to determine its origin. E171F PCIe fatal error on Bus ## Device ## Function ## The system BIOS has reported a PCIe fatal error on a component that resides in PCI configuration space at bus ##, device ##, function ##. E1810 Hard drive ## The specified hard drive fault. Review has experienced a fault. & clear SEL. E1812 Hard drive ## The specified hard removed. Check drive has been removed drive. from the system. E1920 iDRAC6 Upgrade optional iDRAC6 Failed. upgrade has failed. E1A14 SAS cable A SAS cable A is missing failure. Check or bad. connection. Corrective Actions Check the SEL for more information and then clear the SEL. Remove AC power to the system for 10 seconds and restart the system. If the problem persists, see "Getting Help" on page 167. Remove and reseat the PCIe expansion cards. If the problem persists, see "Troubleshooting Expansion Cards" on page 159. See "Troubleshooting a Hard Drive" on page 156. Information only. See "Troubleshooting Expansion Cards" on page 159. Reseat the cable. If the problem persists, replace cable. If the problem persists, see "Getting Help" on page 167. 30 About Your System