Dell External OEMR R410 Owners Manual - Page 25
E122D Memory, E122E On-board
View all Dell External OEMR R410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Table 1-2. LCD Status Messages (Optional) (continued) Code E122A E122C E122D E122E E1310 E1311 Text CPU # VTT Regulator failure. Reseat CPU. Causes Specified processor VTT voltage regulator has failed. CPU Power Fault. Power cycle AC. A power fault was detected when powering up the processor(s). Memory One of the memory Regulator # regulators has failed. Failed. Reseat DIMMs. On-board regulator failed. Call support. One of the on-board voltage regulators failed. Fan ## RPM exceeding range. Check fan. RPM of specified fan is outside of the intended operating range. Fan module ## RPM exceeding range. Check fan. RPM of specified fan in specified module is outside of intended operating range. Corrective Actions Reseat the processor(s). See "Troubleshooting the Microprocessors" on page 160. If the problem persists, see "Getting Help" on page 167. Remove AC power to the system for 10 seconds and restart the system. If the problem persists, see "Getting Help" on page 167. Reseat the memory modules. See "Troubleshooting System Memory" on page 152. Remove AC power to the system for 10 seconds and restart the system. If the problem persists, see "Getting Help" on page 167. See "Troubleshooting System Cooling Problems" on page 151. See "Troubleshooting System Cooling Problems" on page 151. About Your System 25