Dell External OEMR R410 Owners Manual - Page 127
Gently lift the heat sink off of the processor and set the heat sink aside
View all Dell External OEMR R410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
5 Using a #2 Phillips screwdriver, loosen one of the heat-sink retention screws. See Figure 3-22. 6 Wait 30 seconds for the heat sink to loosen from the processor. 7 Loosen the other heat-sink retention screws. 8 Gently lift the heat sink off of the processor and set the heat sink aside with thermal grease side facing up. CAUTION: The processor is held in its socket under strong pressure. Be aware that the release lever can spring up suddenly if not firmly grasped. 9 Position your thumb firmly over the processor socket-release lever and release the lever from the locked position. Rotate the lever 90 degrees upward until the processor is released from the socket. See Figure 3-23. Figure 3-22. Installing and Removing the Heat Sink 2 1 1 heat-sink retention screws (4) 2 heat sink Installing System Components 127