Epson EPL-N2000 User Manual - Page 111
Printer Open, RAM Check, Ready, Reset, Reset All, Reset to Save, Continue, Self Test
View all Epson EPL-N2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Printer Open The printer cover is open; close it to continue printing. RAM Check The printer is checking the RAM; wait a moment for it to finish. ROM Check The printer is checking the ROM; wait a moment for it to finish. Ready The printer is ready to print. Reset The printer's current interface has been reset and the buffer is cleared. However, other interfaces may still be active and retain their settings and data. Reset All All printer settings for all interfaces have been reset to the default configuration (the last settings saved). Reset to Save You have changed a SelecType setting but the new value is not activated yet. Do one of the following: (1) exit SelecType by pressing Continue or On Line (the new setting is activated after the current print job is finished), or (2) reset the printer by pressing ALT and Continue at the same time. Self Test The printer is performing its internal self test; wait a few moments for it to finish. Troubleshooting 6-7