Epson EPL-N2000 User Manual - Page 59
Setup Menu, The Setup menu items allow you to customize various printer
View all Epson EPL-N2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
* You can also change these settings using OneTouch modes; see page 3-5. ** Increasing the print density increases toner consumption. If you select darker print, you may need to replace the imaging cartridge more often. *** Changing the Page Protect setting reconfigures your printer memory and may erase any downloaded fonts. Setup Menu The Setup menu items allow you to customize various printer modes, select a control panel language, check the total pages printed to date, and check or reset the toner counter. Setup menu items Menu item Description Interface Sets whether the printer can receive data through all available interfaces (Auto) or only one of these: Parallel B, Parallel C, Serial, L/T, AUX. Time Out Sets the amount of time the printer waits to receive data before terminating an incomplete print job. After the time-out period, it searches for new data on another interface channel. Various settings are available between 5 to 300 seconds; default is 60. Standby Turns standby mode on (or off) to reduce power used by the fixing heater when the printer is not used for 60 minutes. It warms up in about 70 seconds when a print job is received; default is Enabled. Lang Selects the language used for control panel display messages and the status sheet: English, French, German, Italian, Spanish, Swedish, Danish, Dutch, Finnish, Portuguese. Printer Name Displays the printer name instead of Ready when the printer is standing by; default is OFF. Using the Control Panel 3-15